Adding some farkels to the F3T this week and thought I would show the volt meter I installed in the dash. http://www.ebay.com/itm/351884215509...%3AMEBIDX%3AIT
If you have any flat area on your particular bike, all you need is some space below it and the installation uses a 1 1/8" hole saw. Tape and then mark your center of hole and drill a pilot hole and then use the hole saw.
I ran my switched power from the "customer power lead" on the left side of the bike.
Buckskin

IMG_0389.jpgIMG_0392.jpg