Mine does the same. The lift arms aren't long enough to go completely across the width of the Spyder.
Type: Posts; User: Culpjp
Mine does the same. The lift arms aren't long enough to go completely across the width of the Spyder.
Were you having static issues before you installed the LED lights?
There will be another event tonight that is just for the Spyder and Ryker. It should have more details than what they showed last night.
$11,499 is closer to a thousand dollar increase over the 2019 models. Though how much of that was the dealer charges, or any other accessories, we won't know until we see the paperwork.
That might explain the price increases everyone it talking about for the 2020 Ryker Rally's. Hopefully they will just be an option for the Rally version and not standard on the Rally.
At that price you might as well buy an F3.
As my MSF instructor would say. It's easy to outdrive your lights at night. With stock lights your maxed out at about 55 mph.
I think Lamonster was working on a mirror that would work with the Lid Lox.
You might want to look at the wires under the side panel you removed. You might have a wire is shorting out, and that's what is blowing the fuse when you turn the ignition.
I've been hearing lots of talk about a price increase for the Rally models only. They have been so popular BRP is wanting to cash in on them more. I can't blame them for wanting to do so.
Are you sure it's the DPS, and not the Gear position sensor? I had issues with my power steering wanting to cut in and out. Soon after the gear position sensor went out.
It's held on with one nut and a spring clip. I'm not sure if you can even rent the tool anywhere. If you watch Sean Smoak's second vlog on the Ryker he shows the tool you need to remove the nut. Also...
I'm sure it will be no different than any other Spyder. It will depend on how you ride. I get better mileage on my GS riding for a long cruise on the highway, versus what I get riding back and forth...
Not having a DPS like other Spyders will help with the current draw on the Ryker. Has anyone compared the battery sizes between the Ryker and a Spyder?
How hard the pulley is to remove, depends on the condition of the splines. On one with no damage the pulley will slide off easily. When it can get difficult is with damaged splines. They will start...
If you changed the brake lights from incandescent to LED that could be causing the issue. What's bad about a Can-Bus system is that messing with one part of the Electrical system can cause issues in...
Do a search on here. There have been a few cases of people getting water into the cylinders after a heavy rainstorm. That's why he added the rain guard. He wouldn't have done it, if there wasn't a...
Try more like one new Model 3. Then again you can buy a lot of cars for cheaper than a loaded RT. I know I drive one. Lol
You can't compare the prices for a Spyder to an automobile.
I've seen YouTube videos of people riding them in the snow. I don't know if you would have clearance for tire chains, without removing the fenders. If you could find snow tires, I bet you could ride...
At homecoming I talked with the engineers about it. They said it really came down to cost. They have batteries that would give them the range they wanted, but they were very expensive to produce....
He complains about his arms being tired after riding. You don't really know how long, and how many turns he made. Others that have ridden Spyders, have said that it doesn't seem much harder to steer.
https://youtu.be/6PTx_bkouBc
Another nice Ryker first ride video. This guy has never been on a Spyder before. He gives a good idea of how hard you can push it in the corners, and gets the tire...
I've had mine on two wheels a couple of times. Always when I was talking a turn a lot faster than I should have. Only once did the nanny kick in. That was the one time I completely different think I...
I bought it from cheapcycleparts.com
Mine had cracked right where the bend is under the edge of the fender. It was almost cracked all the way from top to bottom. The fender would fell right off. ...
If you do a search you can find several posts from people using fenders from other motorcycles and modified for the Spyder. The BRP sport fender will run you about $300 USD.
I replaced the bracket...
I have a feeling yes you will be able to roll it around with the engine off, this is why it has the parking brake, to keep it from rolling with the engine off.
It will depend on the rider. If you're just wanting to get into a Spyder and aren't looking for a specific model. Then you might not want to spend 12k for a used one versus a new one for cheaper. If...
Here is a long first ride video of the Rally edition.
https://youtu.be/816PQMw8IYA
You have to remember an on road vehicle is used much differently than an off road vehicle.
Not many ATV's and snowmobiles are ridden at highway speeds for hours, and hours at a time.
BRP has...
The 1330 uses completely different shift points. It doesn't need the high RPM's.