Installing a switch

I am wanting to install a switch for led lighting in the spare spot with the other 4 switches.
My question is will that spare blank cover come off without removing the entire cluster.

Thanks all,
Butch

Yes you can pry it up and pop it out.
But to get the wiring and what not run it is helpful to remove the glove box. It's not that hard to do.

Bob

Quote:

---

Originally Posted by finless

Yes you can pry it up and pop it out.
But to get the wiring and what not run it is helpful to remove the glove box. It's not that hard to do.

Bob

---

Thanks my friend. I've had it off before I just don't want to do it.:roflblack:

Just do what all electricians do instead of tearing down the walls in your home they fish the wires in....you can do the same .....I've done it on my RT........Go slow, if you hit an obstruction .......jiggle it :roflblack::roflblack::roflblack:.....Mike :bbq:

Check out my thread here:

http://www.spyderlovers.com/forums/s...-t-last-a-week!

Quote:

---

Originally Posted by Jetfixer

Check out my thread here:

http://www.spyderlovers.com/forums/s...-t-last-a-week!

---

It appears that all that was required was drilling a hole in the center section (apart from the wiring). Is that correct?

Quote:

---

Originally Posted by Jetfixer

Check out my thread here:

http://www.spyderlovers.com/forums/s...-t-last-a-week!

---

Jetfixer,

Your thread was the first thing I thought of when I saw this one. All the answers are there. I've got it bookmarked for future reference as I'm sure I'll need that information also at some point. :thumbup:

Quote:

---

Originally Posted by OverHillAndDale

It appears that all that was required was drilling a hole in the center section (apart from the wiring). Is that correct?

---

Not so much drilling a hole as enlarging the small round hole that's there to a rectangle the correct size to allow the new switch to "snap" in and stay. I used an xacto type knife and just took my time.

Quote:

---

Originally Posted by Jetfixer

Check out my thread here:

http://www.spyderlovers.com/forums/s...-t-last-a-week!

---

I have read that thread. You are the one that got me to do this. I have that very same switch.
Thanks my friend.

Butch