Anyone ever had to remove this piece from the Spyder? Got a paint chip on a brand new machine and I can't live with it like that. Going to have to remove it and take it to the paint shop. Also does the chrome pieces come off of this piece? Paint shop said they can't paint it on the machine because it will eventually start to peel if they don't do it right which is why the chrome has to come off also. If it does come off is there some instructions somewhere that will guide me through it? Not a great mechanic but I will try anything once.
Anyone ever had to remove this piece from the Spyder? Got a paint chip on a brand new machine and I can't live with it like that. Going to have to remove it and take it to the paint shop. Also does the chrome pieces come off of this piece? Paint shop said they can't paint it on the machine because it will eventually start to peel if they don't do it right which is why the chrome has to come off also. If it does come off is there some instructions somewhere that will guide me through it? Not a great mechanic but I will try anything once.
A little help please.
First off you need to tell us which piece you are talking about, if it is a paintable body part it should come off .
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
If you ride much, this will not be your last chip. What would I do? I would get some matching touch up paint, apply a dab or two, let it dry for a few days, then use some compound and smooth it off. A lot cheaper and no one will ever notice it.
2008 GS SE5 in 2008
Traded at 43,000 miles for a left over
2010 RT SM5 in 2011
Traded at 57,000 for a left over
2014 RTS SE6 in 2015, which has 35,000 miles
Oct 19th, 2017, totaled 2014 RT while killing a Javaline
Dec 12th, 2017 drove a 2017 F3L home. What an awesome machine!
Dennis, removing most anything on an RT starts with the mirrors and requires that everything between the problem and the mirrors must be removed.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
lotta work. Try the touchup and protective vinyl and see if you can live with it. If not then go for the full on painting. If you go for the full job think about if you want some custom work while you have all the panels off anyway...
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Anyone ever had to remove this piece from the Spyder? Got a paint chip on a brand new machine and I can't live with it like that. Going to have to remove it and take it to the paint shop. Also does the chrome pieces come off of this piece? Paint shop said they can't paint it on the machine because it will eventually start to peel if they don't do it right which is why the chrome has to come off also. If it does come off is there some instructions somewhere that will guide me through it? Not a great mechanic but I will try anything once.
A little help please.
Amazing. Simply amazing. I had an IDENTICAL chip when I received delivery of my brand spanking new 2013 almost two years ago. My dealer had it replaced. Is there any possibility this could have occurred?
If you ride much, this will not be your last chip. What would I do? I would get some matching touch up paint, apply a dab or two, let it dry for a few days, then use some compound and smooth it off. A lot cheaper and no one will ever notice it.
My 2011 now has 26000 miles and to my dismay chips. I stressed at first but after every riding season take the bike apart and have it painted. not an option for me. this sucks. But like above riding = chips.
Curious in regards to the "paint shop" the op is talking about. I would expect an automotive paint shop that is known for high end work on performance cars could touch this up and blend it while installed fairly easily.
No doubt everyone prefers to paint items off the vehicle, but sometimes it is just not practical.
It looks like you have the Pearl White same as me. Tried ordering the pearl white touch up paint from Touch up Direct but the colour was way off. There was to much grey in it. At first it really bothered me because my eyes would go right to it, because I knew exactly where the spot was. After a few weeks, it didn’t even matter. I figure if I get a lot of chips I can always replace the part.
Dennis, I thought the dealer was going to repair it for you? Let them worry about removing all of the plastic.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
The dealer is balking because I drove it off the lot and 5 miles home before I noticed it. I inspected everything but the front end and noticed the chip after I got home. I called them immediately and all they said was bring it in and talk to the shop. He said he would submit a claim to BRP and see what happens. I'm not too optimistic. And it really bugs me. I have spent $48,000 at that dealership in the last year between the new Spyder and a Commander UTV. I upgrade every few years so we will see how they treat me.
Originally Posted by SpyderAnn01
Dennis, I thought the dealer was going to repair it for you? Let them worry about removing all of the plastic.
Get a life,,, if you can't stand chips, better leave it in the garage,,, oh opps, that's where my first one came from,,,, it's just that if you are going to enjoy it, it's going to show signs of use,,, luckily what's under the paint don't rust.
Well, I finally heard from my dealer. The service manager Chad stepped up and went to bat for me against BRP. He hit a homer and they are replacing the part. Dealership did the right thing and will continue to get my business. Just waiting for the part to come in.
20150926_112112.jpgI have 2 different Spyder RTs to do some touchup but can't seem to find the paint. 1 is a 2014 RT SM6 Pearl White and the other is a 2015 RT Limited Ruby Red. Anyone know where I can get some touchup paint for these bikes? They are the red and the white ones are all the same color.
Last edited by Retsailor38; 06-26-2016 at 03:51 PM.
Thanks Bob, the only problem I have now is they show the color as Intense Red but if you look at the picture it is not that bright in color.
You absolutely CANNOT go by or trust the color as you see it on your computer. The ONLY way to know for sure is to order it and use it.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Well, I finally heard from my dealer. The service manager Chad stepped up and went to bat for me against BRP. He hit a homer and they are replacing the part. Dealership did the right thing and will continue to get my business. Just waiting for the part to come in.