-
ARRRRRRRR!!!!!!!.,
Ok so I took bags bracket and trailer hitch off Spyder ...never to see them again ....
took rear peg brackets off to have powder coated .... Now question of the day is ....DID HOUDINI PUT THESE FRONT PEG BRACKETS ON.??? Any buddy take these off can give me any break down in how they come off? On top of being 29 degrees here and I have no heat in my garage ..... So yes I'm getting a bit irritated .....
any help will be grateful ...
thanks in advance ..
-
Just think how cold you would be if you weren't irritated. Good luck with your project.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Sorry, can't answer your question but I can say that just a few miles away from you my key is frozen in the ignition. Yes, the cold weather is upon us.
-
ARRRRRRRR!!!!!!!.,
They are assembled with a 3M ThreadLocker product and are, as you have found out extremely difficult to remove.
Here is the "official" removal technique.
Is it possible to remove anaerobic adhesives once cured?
Products such as n-propyl bromide, chlorinated solvents or paint stripping solvents can be used to remove anaerobic adhesives. Use appropriate personal protection and follow the manufacturers’ instructions for safe handling of solvents
Hope this helps.
KYSPYDER
-
4 55 gallon drums of elbow grease. 3 tubs of determination. 16 brand new swear words. 2 broken tools. Three band aids. This was my list of needs for taking mine off, and I was in a 60 degree warehouse. They can be taken off, but the determination is key.
-
Very Active Member
?????? FRONT PEG BRACKETS ? ? ?
-
Foot pegs
Originally Posted by tatt2r
Ok so I took bags bracket and trailer hitch off Spyder ...never to see them again ....
took rear peg brackets off to have powder coated .... Now question of the day is ....DID HOUDINI PUT THESE FRONT PEG BRACKETS ON.??? Any buddy take these off can give me any break down in how they come off? On top of being 29 degrees here and I have no heat in my garage ..... So yes I'm getting a bit irritated .....
any help will be grateful ...
thanks in advance ..
Not sure on your '08 but I removed the pegs on my '12 RT SE5 and it felt like the left peg was welded on. Learned about the thread locker here on SL. Sprayed the nut and bolt threads with WD40 several times and let it soak between sprays. The WD40 dissolved the thread locker and the then the nut was very easy to remove. The right peg bolt did not have the locker on it. Hope this helps.
Last edited by SpyRyd; 11-14-2013 at 03:07 PM.
-
-
Originally Posted by BLUEKNIGHT911
Brackets ...not pegs
Sent from my iPad using Tapatalk HD
-
When I removed the ones off of my RT; I took an electric soldering pencil, and put a little heat to it first...
-
Very Active Member
3 bolts?
If I understand what your talking about it should be 3 bolts.
rs braket.JPG
2018 F3 LIMITED
-
-
If the thread locker is a medium strength, heat the bolt to 300 deg. F. This will make the thread locker weaken and the bolt will come out easier. After the bolt cools use WD40 and then try to remove the bolt. That's IMHO.
Mike
-
Originally Posted by JCSMOKE
Available at both but Whitney has a rewards program I think.
Ordering today...
-
Originally Posted by billybovine
If I understand what your talking about it should be 3 bolts.
rs braket.JPG
Thanks bill do you have pic of right side bracket also ? They are a bit different
Sent from my iPad using Tapatalk HD
-
Very Active Member
Ooops!
Originally Posted by tatt2r
Thanks bill do you have pic of right side bracket also ? They are a bit different
Sent from my iPad using Tapatalk HD
I assumed left and right are the symmetrical. Guess not.
Here is the right side.
rs foot.JPG
You can look it up for yourself if the view I gave you does not work. I get get this pic from http://can-am.brp.com/spyder/ hover over OWNERS, hover over PARTS & ACCESSORIES, click on PARTS CATALOG. From there choose your year and type of Spyder. Then choose the exploded parts view that may contain the info you want. The titles are a bit cryptic, but you should quickly figure it out.
2018 F3 LIMITED
-
Originally Posted by billybovine
I assumed left and right are the symmetrical. Guess not.
Here is the right side.
rs foot.JPG
You can look it up for yourself if the view I gave you does not work. I get get this pic from http://can-am.brp.com/spyder/ hover over OWNERS, hover over PARTS & ACCESSORIES, click on PARTS CATALOG. From there choose your year and type of Spyder. Then choose the exploded parts view that may contain the info you want. The titles are a bit cryptic, but you should quickly figure it out.
Thank you
Sent from my iPad using Tapatalk HD
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|