-
Very Active Member
Originally Posted by kennygee
Just got the 27inch windscreen the only regret is its not dark enough but i can definitly work with it...road the bike to work and virtually no head buffeting...hitting the highway after work...i am including in the a side by side of the blue ridge windscreen and the 27 inch windscreen...I hope this helps anyone struggle with the smaller screens...
Nice pics!
-
Originally Posted by nycgordonf
Would appreciate any thoughts on the Route 129 windshield, or other alternatives. Thanks a million!
I installed a F4 Custom on my F3LTD and love it. Very clear see thru but I have it such that I look just over the top edge. Very little turbulence, if any. I also bought the wings. The setup is a bit warm in the summer however. Otherwise highly recommended. I checked the website they seem to have a sale. Good time to buy.
Good luck, finding a proper windshield can be a journey.
2018 F3 Limited black, dark
-
So, I felt compelled to reply to my own thread as a follow-up.
The 7Jurock windshield arrived last week. I had opted for the tallest (27") version to help alleviate the unbearable turbulence encountered with the OEM Blue Ridge winsdhield.
The price for the 7Jurock is definitely fair. $200 for a factory-tinted 27" windshield is more reasonable than BRP's up-the-pooper price of $500. Although the OEM one does include the hardware so I suppose it's only half a rip-off. Still, I willingly paid the OEM price, assuming they've put adequate engineering and testing into this product (they clearly have not).
So the 27" 7Jurock windshield definitely doesn't add to the aesthetics of the Spyder. While manuvering the Spyder in my driveway (hard left, hard right turns), the handlebar will hit the windshield while steering at full deflection. If you're not wearing gloves, be ready for an easy pinch.
Now, as for the ride - well, it's certainly an improvement over the Blue Ridge windshield (which is only 21.5" tall). However, as a 6'2" guy, even the tallest 7Jurock windshield proved to be a bit too short. At 70+mph I was still getting considerable turbulence, causing serious helmet vibration which made it difficult to read road signs.
Again, the improvement is stellar, but in the end, I've decided a windshield (of any kind) just isn't the right fit for me. I can see how for riders who are 1-3" shorter the turbulence should be negligible, as they're sitting in a lower position. In my case however, the benefits didn't outweigh the drawbacks.
This was my first time riding with a windshield of any kind, and it proved to be a $800 venture in money & time. I used to always think windshields were mostly a matter of aesthetics. Now I know better. It's a matter of looks, wind deflection, but also personal taste and effects of turbulence which affect riders of different heights in different ways.
For me, it's back to bare-bones, and my Blue Ridge (21.5") and 7Jurock (27") windshields, with all mounting hardware are sitting on a shelf, after seeing no more than 10 miles of use. For anyone interested, this $800 windshield combo can be yours for $200. Just PM me if interested.
Modding my car (and previously my Sportster) have always been a hit-or-miss endeavors. I don't particularly regret it, I'm just happy I learned something new.
Cheers everyone. Thanks for your feedback, recommendations, and tips. In the end, windshields just aren't for me.
-
Very Active Member
-
Very Active Member
Knowing that 7Jurock provides no mounting hardware, the wider and taller windshield I got from them works very well with the stock mounts. And that's how I want it to be, not liking the black hardware others supply.
Here's that w/s on the OEM mounts, using flat faucet washers for spacers under and over the plastic.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Someone might want to try this stuff and see if it helps any. https://saeng.com/product/gen-4-edgi...nce-reduction/
2014 RTL Platinum
-
Very Active Member
Originally Posted by UtahPete
Didn't help on My Valkyrie nor my Gold wings.
-
Active Member
One more review of the Blue Ridge. I installed it on Thursday, and went for a ride today. At speeds up to 80 km (50 mph), it is ok. At 100 km (62 mph), lots of noise are the helmet, such that I can’t hear any traffic noise, including a semi. I had earplugs. At 100 km, I leaned forward and noise disappeared when my helmet chin bar was 6” above the fuel tank. I have a modular helmet. I have 14 days to return for full refund. Not sure I want to add a ‘wing’ to deflect air, as it may damage helmet. Most windshield manufacturers do not supply hardware. I know that CalSci supplies hardware, but there may be others.
Rick
2019 F3 base
Shad saddlebags with Admore led light kit
BajaRon swaybar
Hopnel mini bra
BRP driver's backrest
Madstad windshield
Ultimate floorboards
CanAm Spyder accessories rear shelf with LinQ adapter
-
Originally Posted by nycgordonf
So, I felt compelled to reply to my own thread as a follow-up.
For me, it's back to bare-bones, and my Blue Ridge (21.5") and 7Jurock (27") windshields, with all mounting hardware are sitting on a shelf, after seeing no more than 10 miles of use. For anyone interested, this $800 windshield combo can be yours for $200. Just PM me if interested.
.
PM sent!
-
Member
Sorry so many issues with the windshields.
I’ve had the Freedom on my/our Harley’s and liked them so much, after finding out I had this option on my F3L, I went for it. After trial and error on getting the right size for me, (17” BTW) it’s just as good as the Harley. The fit, finish, material and look is great!
I’ve played with the wind resistance to feel where it picks back up. Again, for me, it’s just below the top of my helmet and definitely outside of my shoulders.
I’m 5’3” and I felt like the 15” too short/low, tho not anywhere was bad as the stock 12”, and the 19” was waaay too tall for me as it cut right across my eyes. So… I think I have the 19” medium tint sold, but have the 15” medium tint for $175 (split shipping) available if anyone is interested!
2021 F3L Black/Chrome
LAMonster:
Ultimate Backrest, Bottle Holder, Baja Ron Sway bar, Cat Delete Pipe, Freedom Windshield, Highway brackets/Black Demond pegs, Upgraded Tension Roller, FOBO Tire Pressure Monitor
TricLED:
Sequential LED Spyder Fender Lights, Run/Brake/Turn Strobe Light Kit, Brake flasher
SlingMods:
Chrome Luggage Rack
Pedal Commander
Spyder Accessories.com:
Tank Pad
Amazon:
Ciro phone holder/mount, Stebel Nautilus Air Horn/Wiring Kit, Short Reach Handlebar
-
Active Member
I have ordered a Puig clip on air foil. Others have had good experience with them. i will report back after installed.
Rick
2019 F3 base
Shad saddlebags with Admore led light kit
BajaRon swaybar
Hopnel mini bra
BRP driver's backrest
Madstad windshield
Ultimate floorboards
CanAm Spyder accessories rear shelf with LinQ adapter
-
Oct. 19, 2021
I just purchased the Freedom 17 inch Freedom Windshield from Lamonster. I works well. I am 5'9" and it keeps the wind off my face and my body. It was well worth the $249 including shipping.
2021-10-14 10.14.2021 001.jpg2021-10-14 10.14.2021 001.jpg
Sorry for the side wise view. I don't know how to correct it. I thought I knew how, but I guess not.
-
Active Member
I've been using the Blue Ridge with X-creen for 5 years now. Works for me.
John F.
Tallahassee, FL
2015 Spyder F3 SE6, black
BRP Driver/passenger Footboards
BRP Adjustable Passenger Backrest
Blue Ridge Windshield
MRA X-Creen Tour, clear, clamp-on
H4 LED Headlights
F3 LED Fog Light Kit, LED Amber Halo Ring Kit, LED Tail Lights, F3 Rear run/brake/turn LEDs
Easy Brackets
Leatherworks, Inc. 120 Special Slight Angle Saddlebags
Custom Dynamics Front Mud Flap LED lights, Street Magic Front Fender Tips, Double Feature Lens
2-up rear shock
Idler pulley kit
-
Active Member
Give F4 windshields a call. I have thery're 21" vented on my F3L, no backdraft. They make fine products
-
Originally Posted by duke50
Give F4 windshields a call. I have thery're 21" vented on my F3L, no backdraft. They make fine products
Mind me asking how tall you are? I'm interested in the F4 shield.
-
I recently had a Blue Ridge screen fitted to my F3-S. When I got 80kph (50mph - I'm in Australia) after leaving the dealer, the turbulence and noise were unbearable and by the time I got home I had a sore neck from fighting the wind. The next morning I decided to modify the screen (I couldn't make it worse). My plan was to cut off the top of the screen just below where it turns up, so I taped it up and first started with a cut about 10mm from the top to see how the jigsaw behaved. The cut looked good so I kept going across the whole screen following the contour. Then I decided I may as well take it for a test ride like this - at 80kph there was an acceptable amount of turbulence and at 100kph it was good. I have since ridden many times and don't even think about how it was originally. I'm about 5'11" tall.
-
Active Member
F4! You absolutely will not be disappointed. I bought the 25" with the vent and the airwings. Amazing difference!! I got the tall one because I'm a touch over 6' and have had lots of people try to dictate what size windscreen I "need"... Opt1.jpg
2021 F3 L , Stock Plugs (COILS, NOT WIRES!) Stock Brake Pedal Magma Red
-
Active Member
Don't ask me why my pic attaches and comes out sideways - all of them apparently do that... Don't know why.
2021 F3 L , Stock Plugs (COILS, NOT WIRES!) Stock Brake Pedal Magma Red
-
Very Active Member
-
Member
-
Ozzie Ozzie Ozzie
Last edited by Peter Aawen; 06-08-2022 at 12:03 AM.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Active Member
I had a 23 inch F4 with a vent in it on my 2017 F3 LTD, never had any type of buffeting. The vent will help with the back pressure.
Last edited by Peter Aawen; 06-08-2022 at 06:01 AM.
Reason: ' 's ;-)
2017 F3 LTD (SOLD)
2017 HD Freewheeler (SOLD)
2021 RT Base Upper and lower adjustable deflectors , Top case, Signature and lower lights, Baja Ron Bar, Back rest,Fobo TPMS, Garmin 396 , LED Fender lights, Rear LED turn and brake lights, Rear Brake light flasher, Rear Saddle bag LED lights, Battery tender, Lamonster Handle Bar Riser.
-
Very Active Member
Originally Posted by deer30084
I've been using the Blue Ridge with X-creen for 5 years now. Works for me.
Ditto for me and also for my husband. I agree that we both had the same issue with the head buffeting before we added the X-creen. I started with the clamp on (figuring I could remove it easier if I hated it) and then ended up drilling the holes in the Blue Ridge for the permanent install of the X-creen within a month or so.
We now have His and Hers Spyders!
Current Spyder: White 2015 F3-S SE6
His Spyder: White 2015 F3 SE6
Previous Spyder: 2012 RT Limited SE5 -- 30,300 miles
Previous rides: Kawasaki & Honda
-
Originally Posted by kennygee
Be very careful with the X-creen Tour....I bought one to go along with the blue ridge windscreen..it was the one that you screw into the exsiting windscreen...drove with it for about a month or so before deciding to go with the 7jurok 27 inch wind screen..any way where the screws were clammed down cracked my blue ridge windscreen so there is no way to return it...so if you get the X-creen Tour screw on or clamp down be very careful how tight you clamp it down...I think it was more operator error and the wind..but all in all i just went with a bigger screen because I want all in one instead of having to put something else on top of a windscreen..
@kennygee how has your 7Jurock been performing? I did Blue ridge with extra on top and it was just hopeless. Looking at a 27inch 7Jurock as I tried the Madstad and it is too narrow and in Australian conditions, just did not cut the mustard. I ride a 2017 F3S.
-
Active Member
Wow! You guys are screwing around with these windshields & throwing all kinds of money at it! Blows my mind. I have a 2019 F3 Limited Black on Black, so I just took the stock windshield, painted the inside black for that black sporty look, and it’s beautiful! Mind you, my passenger gets blasted with wind, but I only ride double maybe 5% of the time...
Last edited by Peter Aawen; 10-05-2022 at 04:15 AM.
Reason: Caps, '!'s & '.'s ;-)
SNOWMOBILING ON PAVEMENT!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|