-
I hope the box doesn't stick to the conveyors etc during the shipping process from the strength of the magnets??
This can happen from my experience.
Last edited by trikermutha; 03-19-2017 at 10:30 AM.
-
Originally Posted by merlot
i did a how to video on saturday
it dont know how to direct link to it
but if you go to youtube site then cut and paste this heading it seems to work
can am spyder rt mirror mounts tutorial
or try this link Magic Mirror Mounts on YouTube
GF is mailing on monday and the site should send confirmation emails when i tell it so i dont have to do individual emails
thanks russ
Here's the video:
-
Must be missing something...what is the purpose of magnet mirrors?
-
for those of use that have a RT and have to beat the mirror off, then the clips break if not done right..So Magic Mirror came out
-
Ozzie Ozzie Ozzie
Originally Posted by trikermutha
I hope the box doesn't stick to the conveyors etc during the shipping process from the strength of the magnets??
This can happen from my experience.
When we were setting up the Crash Test Dummies, I got a few kits sent to me in the one carton, so if they were gonna stick to anything, it should've happened then... they didn't have any hassles - and that was 18 magnets in one wrapping & pretty much the same carton!! So with only 6 magnets wrapped up even better & packed in their wrapping into the carton, it should be fine!
Here's hoping they all get to their intended recipients OK & you all find them easy to fit - which shouldn't be hard, as you can see from the vid! Enjoy.
-
Very Active Member
Originally Posted by Windjamer
Must be missing something...what is the purpose of magnet mirrors?
WINDJAMER, for those of us with the RT Style "Clip" on mirrors that are a nightmare. By your avatar of the F3 it's an experience you're blessed to miss.
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
-
Originally Posted by Peter Aawen
When we were setting up the Crash Test Dummies, I got a few kits sent to me in the one carton, so if they were gonna stick to anything, it should've happened then... they didn't have any hassles - and that was 18 magnets in one wrapping & pretty much the same carton!! So with only 6 magnets wrapped up even better & packed in their wrapping into the carton, it should be fine!
Here's hoping they all get to their intended recipients OK & you all find them easy to fit - which shouldn't be hard, as you can see from the vid! Enjoy.
The reason I brought this up in Russ's video his tools were sticking to the box.
-
Had a 2014 RT but never had to remove the mirrors...guess I missed the fun
Originally Posted by DGoebel
WINDJAMER, for those of us with the RT Style "Clip" on mirrors that are a nightmare. By your avatar of the F3 it's an experience you're blessed to miss.
-
-
Originally Posted by Windjamer
Had a 2014 RT but never had to remove the mirrors...guess I missed the fun
How did you change your oil filter without removing the side panels and mirror?
-
Active Member
Merlot,
1st of great product , great design, Congrats
will any of these be able to purchase at Spyderfest ?
Will you ever have enough of these made to catch up to the demand ?
Will you ever have a stateside store ?
If all these answers are No, if a guy places an order now , how long will it be ?
Thanks
2016 RT-S Pearl White
BRP Driver Backrest
Lamonster Spyderdock, (2) Spydercuffs
Magic Mirror w/Doc Humphreys tethers
(2) Rokform phone mounts
FOBO
SpyderPops Bumpskid,missing belt guard,Rear strobe LEDs
Lamonster LED headlights & foglights
Spyder Pockets
LED front fender kit -running & turn signals
Custom Back off mudflap
Vinyl nameplate & 1330 triple decals by New Image Signs
Custom RLS exhaust
Hogtunes speakers 5 1/4 front and back
Memphis Powersports Amp
Her name is " Purl"
-
SpyderLovers Sponsor
Originally Posted by Kredab
Merlot,
1st of great product , great design, Congrats
will any of these be able to purchase at Spyderfest ?
Will you ever have enough of these made to catch up to the demand ?
Will you ever have a stateside store ?
If all these answers are No, if a guy places an order now , how long will it be ?
Thanks
thanks for post
end of the month dealers kits will be ready
the plan is to get them to the dealers well before spyderfest
3dealers have been sent a sample
after they appraise I will send kits to them if they wish to proceed
i can't say who as I don't have their orders yet,but you know them all well
re supply.....I expect to be playing catchup into may but after that I retire and it will be easy to keep the product up
re store....the dealers will be supplied with spares so if you do happen to need anything there will be minimum downtime
thanks. Russ (and Brenda)
orders placed now.....I plan to overrun dealers batch by about 30 kits so if not too many orders placed you can expect mailing 2nd week in april
Last edited by merlot; 03-19-2017 at 10:46 PM.
-
Originally Posted by bzbaeren
Did yo install these on your ryde and how do you feel about them after the install if you did?
I'm still waiting for them to arrive... I saw that the installation video had been posted, so I figured that bringing it over here would help everyone see how easy it should be to perform this task...
-
Active Member
Magic Mirrors
Received an e-mail from Merlot @ 4:50 AM today MIRRORS SHIPPED. Should take a week to 10 days to get here.
-
GOS member (Girls On Spyders)
Silly Question
Possibly silly anyway. With the strength of these magnets and their proximity to "electronic things" on the byke .... any chance of something going awry with some internal circuitry? I am especially interested in the CB ..... about to have mine replace a SECOND time (two bad units on a 2016 after the CB on my 2012 was nearly flawless).
BTW, I REALLY like these Magic Mirrors ... I have broken, or severely bent, pins on both my 2012 and 2016 RT. Looking forward to ordering my own and doing away with that spooky set of "SMACKS" required to remove the mirrors now.
Thank you for the response ..... Ann
__________________________________________________ _
2016 RT Limited -- "Jubilee" (as in Cherries)
Guardian Bell (gift from spyderowboy)
ISCI Dual Flag Mount – Tall Poles
Lamonster Bottle Holder and Spyder Cuff
Spyderpops Missing Belt Guard
Spyderpops Bumpskid
Spyderpops Rear Run / Brake / Turn LEDs
Spyderpops Mirror LEDs
Custom Dynamics HMT Brake
Spyderpops Keep Out The Trash (KOTT) Grills
Don't Eat Mud / mudflap
__________________________________________________ __
-
Very Active Member
Originally Posted by Spyder_Cowgirl
Possibly silly anyway. With the strength of these magnets and their proximity to "electronic things" on the byke .... any chance of something going awry with some internal circuitry? I am especially interested in the CB ..... about to have mine replace a SECOND time (two bad units on a 2016 after the CB on my 2012 was nearly flawless).
BTW, I REALLY like these Magic Mirrors ... I have broken, or severely bent, pins on both my 2012 and 2016 RT. Looking forward to ordering my own and doing away with that spooky set of "SMACKS" required to remove the mirrors now.
Thank you for the response ..... Ann
If you read this thread :- http://www.spyderlovers.com/forums/s...=Magic+mirrors
You will see this question was raised at #68 and an answer was made Ref the electronics on the Spyders
I don't believe when fitted they will cause any problems just ensue you keep them far from electronics when fitting them
Last edited by eddieshep999; 03-21-2017 at 03:03 AM.
Eddie Sheppard
Poole Dorset UK
Get a Spyder - See the World
-
-
Very Active Member
-
-
Very Active Member
Originally Posted by Bob Denman
Nothing here for me...
Should I be worried?
I am also waiting to hear some good news but with the time difference and knowing he has been extremely busy getting all the items together, Preparing to pack and post to us purchasers throughout the world and doing the installation video I am sure he will let us know as and when he can
So don't worry Bob, Merlot is on the case
Last edited by eddieshep999; 03-21-2017 at 03:04 AM.
Eddie Sheppard
Poole Dorset UK
Get a Spyder - See the World
-
Active Member
Originally Posted by merlot
hi all
this is my first post on sponsors board
i have updated the website so no need to repeat it here
suffice to say i am still waiting for bulk magnet suppliers(2) to inform me that product has been posted(to me)..i have been waiting a month now
once i receive said magnets i will then be able to reorder(i cant re-order til i know they are correct),then continue supply on a fortnightly basis
as soon as they land i can complete the sets and start posting(mid march?)
meanwhile i have done a couple of "how to" videos on you tube https://www.youtube.com/channel/UCvlj8fD5dfb3fg6cWbujjLw
or there is a link on website www.magicmirrors.shop
price rise on 1st of march due to handling costs(i had to take on an extra hand to help with packaging) but have tried to keep costs down
they still dont cost as much as one front tyre
thanks for your patience
russ
Will be waiting
thanks
gary
-
Active Member
Originally Posted by NewYorkSpyder
Received an e-mail from Merlot @ 4:50 AM today MIRRORS SHIPPED. Should take a week to 10 days to get here.
, I did as well !
Current: "Scarlett", 2017 Can Am F3-T, SE6, Intense Red Pearl.
BRP heated grips, DIY brake light strip and turn signal strips, Chrome/LED brake light tag frame, SpyderPops bumpskid, Baja Ron swaybar and billet links, Lamonster Third Peg, BRP Adjustable Passenger Backrest, SpyderPops Missing Belt Guard, ShowChrome oversize brake pedal, TricLED foglights.
Previous: "Synthia", 2014 Can Am Spyder RT, SM6, Pearl White.
-
SpyderLovers Sponsor
auto confirmations
Originally Posted by Bob Denman
Nothing here for me...
Should I be worried?
Hi bob,eddie
i ticked all buyers boxes at the same time
it auto sends email for confirmation
if you don't get one then just be aware that your package was sent earlier in the day regardless
i don't know mailing times but when I buy from USA it seems to turn up quite quickly
obviously I've never done this before so really no sure when you will actually get the kit
re back orders
mailouts for ALL outstanding orders hoping to complete by end of march
thanks again for patience...russ
-
03-20-2017, 04:04 PM
#100
Active Member
Current: "Scarlett", 2017 Can Am F3-T, SE6, Intense Red Pearl.
BRP heated grips, DIY brake light strip and turn signal strips, Chrome/LED brake light tag frame, SpyderPops bumpskid, Baja Ron swaybar and billet links, Lamonster Third Peg, BRP Adjustable Passenger Backrest, SpyderPops Missing Belt Guard, ShowChrome oversize brake pedal, TricLED foglights.
Previous: "Synthia", 2014 Can Am Spyder RT, SM6, Pearl White.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|