-
Very Active Member
A spider for your spyder
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Originally Posted by Bfromla
Thanks for the info! Even though bi already have a booster, that seem like a good deal! Would it be enough to jump start your car?
-
Originally Posted by Bfromla
Don't see a pig tail connector, but it could be too much for it to handle.
-
Thanks for posting this!
The price certainly seems to be reasonable...
-
Very Active Member
Jumper clamps
The clamps are there to start a large battery but the wires sure look SMALL.
Small wires cause:::::::::::: Kaos
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Very Active Member
Last edited by Bfromla; 12-09-2016 at 12:41 AM.
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Originally Posted by Bfromla
Why would it need a pig tail connector? You cant jump start from those & that it its primary function. I agree The wire gauge may look small but is made to work. Small enough for the unit & pouch to fit in a glovebox.
I should add i already have a booster also fyi it is a Stanley walmart
i like it but is a bit large & has a big button is lil too ez to push when packing away & it will discharge so i tape a fender washer over it. (Seen in pic). But what i really like about the unit is its built in safety so say if my sister needs it i can just drop off with her , something i cant do with jumper-cables.
How well does it work? Do you go direct to the Battery or use the power takeoff?
-
A spyder for your Spyder
Originally Posted by Zip
How well does it work? Do you go direct to the Battery or use the power takeoff?
I have the Stanley Power Pack, bought it from the Walmart clearance isle for $40.00. I have had to use the unit one time, works great. Unit seems to hold the charge well.
Good
Luck
-
Originally Posted by Bfromla
the price makes me think it is cheap chinese, i have 2 anti gravity micro starts @ 120 ea. & i wouldn't chance the
time you really really need it to work.
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Originally Posted by SPECTACUALR SPIDERMAN
the price makes me think it is cheap chinese, i have 2 anti gravity micro starts @ 120 ea. & i wouldn't chance the
time you really really need it to work.
If price makes the unit "cheap Chinese" then sobeit. I could care less as long as it works.
Cheap Chinese, where do you think the battery units for the Anti-Gravity are made?
Good Luck
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|