-
underside panel
The plastic panel on my wife's 2013 STS came loose and it rubbed on the road and tore it up pretty bad. I have what is left tie wrapped up. I know a lot of people take them off when they change their oil and put them on the shelf. My wife wants hers fixed. I tried to talk her into just removing it but no luck. She likes things the way they were made. If someone had one that they would like to get rid of it sure would get me some needed ataboys. Thanks in advance.
-
Little checking..
I would just order a new one from cheapcycleparts.com and replace it. Few, if any, methods of repairs on plastics don't work well. Seems every time a glue comes out to fix plastics they change the compounds so they won't work on the new stuff...
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
SpyderLovers Sponsor
Picture
Take a picture of what you need. I have 6 belly pans on the shelf; I don't remember what they came off of. I do know that they are better on the shelf. If I have a match, it's yours. Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Here is the exploded view.
I would guess you are talking about left item 61. Goofy there are 2 item 61's It's only $20 CAD new. It will be even less in USD.
61 705005413 LH Deflector Pannel. ST, ST-S, $19.84 CAD
61 705005414 RH Deflector Pannel $19.46 CAD
2018 F3 LIMITED
-
cptjam
It is #61 in the diagram above. I will try to get a better pic.
-
Very Active Member
Originally Posted by jcasey
cptjam
It is #61 in the diagram above. I will try to get a better pic.
61 left or 61 right?
2018 F3 LIMITED
-
Can't get it to attach. But if you go to cheapcycleparts to this link you can expand it. Let me know and thanks!
http://www.cheapcycleparts.com/oempa...nd-accessories
-
-
#95 on the procaliber site.
-
Originally Posted by cptjam
Take a picture of what you need. I have 6 belly pans on the shelf; I don't remember what they came off of. I do know that they are better on the shelf. If I have a match, it's yours. Joe
61 right on cheapcycleparts and 95 on procaliber Thanks
-
For some reason it won't let me quote. Sorry for all the post. To be clear it is the 61 on the right looking at the diagram and on the left when sitting on the Spyder. It is the larger 61 Thanks
-
Active Member
Oil change one is left...
Originally Posted by jcasey
For some reason it won't let me quote. Sorry for all the post. To be clear it is the 61 on the right looking at the diagram and on the left when sitting on the Spyder. It is the larger 61 Thanks
.... just replaced it on my son in law spyder.... always talk as when sitting on the bike.
Richard
* 2012 RS SE5 (hers)
* 2013 ST SM5 (mine)
Daughter RSS SE5 2014
Son in law RSS SM5 2013
P.S. 3 Kumho AST 225/50R15 and 1 Toyo Proxies 4 225/50R15 rear tires
2 sets of Kumho 175/55R15 front tires
1 set of Hankook V4
1 set of Canadian Tire General tire Evertrek RTX in 14" for the 2012 ...
-
Very Active Member
Panel
I think I have one left over from my ST-S. I'll check after work and if I still have it, I'll send it to you for a small shipping charge.
2020 F3 Ltd
Spyderpops Bumpskid
Spyderpops Brake/Run/Turn Signal LED's
Lamonster Garage LED Fog Lights and Headlights
2013 ST-S retired 1/9/16 at 25,061 miles
2015 F3S sold at 77,565 miles.
-
Very Active Member
2018 F3 LIMITED
-
Originally Posted by JKMSPYDER
I think I have one left over from my ST-S. I'll check after work and if I still have it, I'll send it to you for a small shipping charge.
Thanks
-
Billybovine
For some reason it will not let me quote. Don't care how much text I put in it says I have to have at least two words! But yes the panel on the left sitting on Spyder
-
SpyderLovers Sponsor
If you take those underbelly panels off your Spyder will run cooler. Engine compartment temps are greatly reduced. Less heat on the fuel tank will also lower the fuel temperature and create less vapors. And you'll bet less heat coming up around the seat. There really isn't any down side to leaving them off. Also makes routine maintenance much easier.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
-
SpyderLovers Sponsor
Nope
I don't have that one! Sorry. Cheap, buy her a new one. Spoil her!
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Sponsor
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|