underside panel

[jcasey]

The plastic panel on my wife's 2013 STS came loose and it rubbed on the road and tore it up pretty bad. I have what is left tie wrapped up. I know a lot of people take them off when they change their oil and put them on the shelf. My wife wants hers fixed. I tried to talk her into just removing it but no luck. She likes things the way they were made. If someone had one that they would like to get rid of it sure would get me some needed ataboys. Thanks in advance.

[Chupaca]

I would just order a new one from cheapcycleparts.com and replace it. Few, if any, methods of repairs on plastics don't work well. Seems every time a glue comes out to fix plastics they change the compounds so they won't work on the new stuff...

[cptjam]

Take a picture of what you need. I have 6 belly pans on the shelf; I don't remember what they came off of. I do know that they are better on the shelf. If I have a match, it's yours. Joe

[billybovine]

Here is the exploded view.




I would guess you are talking about left item 61. Goofy there are 2 item 61's It's only $20 CAD new. It will be even less in USD.

61 705005413 LH Deflector Pannel. ST, ST-S, $19.84 CAD
61 705005414 RH Deflector Pannel $19.46 CAD

[jcasey]

cptjam
It is #61 in the diagram above. I will try to get a better pic.

[billybovine]

cptjam
It is #61 in the diagram above. I will try to get a better pic.

61 left or 61 right?

[jcasey]

Can't get it to attach. But if you go to cheapcycleparts to this link you can expand it. Let me know and thanks!
http://www.cheapcycleparts.com/oempa...nd-accessories

[jcasey]

61 right

[jcasey]

#95 on the procaliber site.

[jcasey]

Take a picture of what you need. I have 6 belly pans on the shelf; I don't remember what they came off of. I do know that they are better on the shelf. If I have a match, it's yours. Joe

61 right on cheapcycleparts and 95 on procaliber Thanks

[jcasey]

For some reason it won't let me quote. Sorry for all the post. To be clear it is the 61 on the right looking at the diagram and on the left when sitting on the Spyder. It is the larger 61 Thanks

[Richardv]

For some reason it won't let me quote. Sorry for all the post. To be clear it is the 61 on the right looking at the diagram and on the left when sitting on the Spyder. It is the larger 61 Thanks

.... just replaced it on my son in law spyder.... always talk as when sitting on the bike.

[JKMSPYDER]

​I think I have one left over from my ST-S. I'll check after work and if I still have it, I'll send it to you for a small shipping charge.

[billybovine]

This one.

Capture.jpg

[jcasey]

​I think I have one left over from my ST-S. I'll check after work and if I still have it, I'll send it to you for a small shipping charge.

Thanks

[jcasey]

Billybovine
For some reason it will not let me quote. Don't care how much text I put in it says I have to have at least two words! But yes the panel on the left sitting on Spyder

[BajaRon]

If you take those underbelly panels off your Spyder will run cooler. Engine compartment temps are greatly reduced. Less heat on the fuel tank will also lower the fuel temperature and create less vapors. And you'll bet less heat coming up around the seat. There really isn't any down side to leaving them off. Also makes routine maintenance much easier.

[jcasey]

If you take those underbelly panels off your Spyder will run cooler. Engine compartment temps are greatly reduced. Less heat on the fuel tank will also lower the fuel temperature and create less vapors. And you'll bet less heat coming up around the seat. There really isn't any down side to leaving them off. Also makes routine maintenance much easier.

She won't buy it! Wants it the way it was designed.

[cptjam]

I don't have that one! Sorry. Cheap, buy her a new one. Spoil her!

[BajaRon]

She won't buy it! Wants it the way it was designed.

Too bad. She's missing out on an improved ride. But, to each their own.