-
10-10-2013, 07:04 PM
#126
Very Active Member
-
10-21-2013, 09:00 PM
#127
Very Active Member
Not sure where the info on the heim joints here came from? Or if it was only for RT series bikes as posted? But, my dealer checked my heim joints (#4 w no dot) and said they are fine.
He said that his BRP bulletin said that heims w/ 1, 3 and 4 are fine. And that the #2 heims were the question and that there was a procedure for checking those? But did not say what that procedure was?
So I'm wondering now if we have a copy of the BRP bulletin on this to clarify?
Last edited by BajaRon; 10-26-2013 at 12:22 PM.
-
10-22-2013, 10:27 AM
#128
Very Active Member
![Quote](images/misc/quote_icon.png) Originally Posted by SNOOPY
Not sure where the info on the heim joints here came from? Or if it was only for RT series bikes as posted? But, my dealer checked my heim joints (#4 w no dot) and said they are fine.
He said that his BRP bulletin said that heims w/ 1, 3 and 4 are fine. And that the #2 heims were the question and that there was a procedure for checking those? But did not say what that procedure was?
So I'm wondering now if we have a copy of the BRP bulletin on this to clarify?
.
2013-06
http://www.spyderlovers.com/forums/s...Link-Rods-(FYI)
2013 Mag Silver SE5 RT BahaRon Sway bar & Sway bar links, Grip Puppies, Kuryakyn Helmet locks , Ultimate Seat w/Utopia Backrest, Dash power outlet, Spyderpops BumpSkid, Swagman Cup holders, Full size Brake Pedal, Seal DLX Floorboards, Freeway Blaster horns, Sylvania Super Bright fender LEDs, Scotchlite 680 Rear & Fender Reflectors, BRP Fog Light Kit, LED Mirror turn signal strips, 2014 RT grille mod. Outlaw Laser Alignment
![](http://www.spyderlovers.com/forums/signaturepics/sigpic13144_3.gif)
-
10-22-2013, 03:51 PM
#129
Very Active Member
-
10-26-2013, 12:23 PM
#130
SpyderLovers Sponsor
![Quote](images/misc/quote_icon.png) Originally Posted by SNOOPY
Not sure where the info on the heim joints here came from? Or if it was only for RT series bikes as posted? But, my dealer checked my heim joints (#4 w no dot) and said they are fine.
He said that his BRP bulletin said that heims w/ 1, 3 and 4 are fine. And that the #2 heims were the question and that there was a procedure for checking those? But did not say what that procedure was?
So I'm wondering now if we have a copy of the BRP bulletin on this to clarify?
Your dealer is wrong. The information is accurate and applies to all 2013 model Spyders (Only). It is the series #4 links that are bad. Series #1, 2 & 3 are fine. He's got his wires crossed up for sure.
The thing is, all of the bad links were from batch #4, but not all batch #4 links are bad. That is why BRP pulled the entire inventory of links when the problem was discovered and inspected all the #4's. There must be a visual way to tell which are good as they marked the good #4's with a paint dot and put them back into inventory.
It's possible yours are not defective #4's, but I would still get them replaced. Why find out the hard way?
![Quote](images/misc/quote_icon.png) Originally Posted by SNOOPY
My bike goes in for it's 600 mile service Monday, I'll ask about the links since mine are the #4 no dot type. I doubt my dealer would have them in stock since they are small, but who knows.
Any dealer worth their salt has these in stock to deal with the recall replacements that come their way.
![Quote](images/misc/quote_icon.png) Originally Posted by SNOOPY
If not, it would probably be a couple/three months before I could get the bike back to them.
Can I get on a list for your heims when they come out? ![pray](images/smilies/51.gif) lol
Anyone who would like to be on the notification list for when I get these custom Heim Joint Links back in stock can email me at fyredad@hotmail.com and I will let you know as soon as I have these ready to ship.
Last edited by BajaRon; 10-26-2013 at 12:31 PM.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
10-26-2013, 12:44 PM
#131
Very Active Member
![Quote](images/misc/quote_icon.png) Originally Posted by SNOOPY
Sorry, but that is just a picture. What does a dealer get sent from BRP?
That has no info on what models or anything?
If my dealer is wrong on what he told me I need proof, not just some picture off the web? Sorry.
I said 2013-06 is the bulletin. The dealer should have it ask him to show it to you or any heim link bulletin. I bet he read it wrong. Lamont has an inside track with BRP if he posts something take it to the bank. He has been a test pilot for them including the 2014 for years.
Last edited by Magdave; 10-26-2013 at 12:46 PM.
2013 Mag Silver SE5 RT BahaRon Sway bar & Sway bar links, Grip Puppies, Kuryakyn Helmet locks , Ultimate Seat w/Utopia Backrest, Dash power outlet, Spyderpops BumpSkid, Swagman Cup holders, Full size Brake Pedal, Seal DLX Floorboards, Freeway Blaster horns, Sylvania Super Bright fender LEDs, Scotchlite 680 Rear & Fender Reflectors, BRP Fog Light Kit, LED Mirror turn signal strips, 2014 RT grille mod. Outlaw Laser Alignment
![](http://www.spyderlovers.com/forums/signaturepics/sigpic13144_3.gif)
-
11-05-2013, 04:32 PM
#132
SpyderLovers Sponsor
![Quote](images/misc/quote_icon.png) Originally Posted by SNOOPY
Sorry, but that is just a picture. What does a dealer get sent from BRP?
That has no info on what models or anything?
If my dealer is wrong on what he told me I need proof, not just some picture off the web? Sorry.
I am wondering how this turned out?
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
11-05-2013, 10:43 PM
#133
Very Active Member
I need something to show them because they say their info is correct.
Last edited by BajaRon; 11-06-2013 at 12:37 PM.
-
11-06-2013, 12:38 PM
#134
SpyderLovers Sponsor
![Quote](images/misc/quote_icon.png) Originally Posted by SNOOPY
I need something to show them because they say their info is correct. ![Frown](images/smilies/frown.png)
Amazing! Your dealership is the only one on the planet (to my knowledge) saying this. I would PM Lamont and see if he has a service bullion reference. No one else has needed documentation because their dealerships have it right. They just go in and get their #4 links replaced, no problem.
Has your dealership shown you the documentation they are getting this information from? Something is really hinky here.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
11-06-2013, 04:41 PM
#135
Very Active Member
![Quote](images/misc/quote_icon.png) Originally Posted by BajaRon
Amazing! Your dealership is the only one on the planet (to my knowledge) saying this. I would PM Lamont and see if he has a service bullion reference. No one else has needed documentation because their dealerships have it right. They just go in and get their #4 links replaced, no problem.
Has your dealership shown you the documentation they are getting this information from? Something is really hinky here.
They didn't show me anything. I think I need to press the issue again and ask for a copy of his info. I heard this directly from the mechanic, and he is the top BRP mechanic in our area for Seadoos and Can Am products.
Last edited by BajaRon; 11-06-2013 at 04:55 PM.
-
11-06-2013, 04:55 PM
#136
SpyderLovers Sponsor
Last edited by BajaRon; 11-06-2013 at 05:12 PM.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
12-29-2013, 03:18 PM
#137
Active Member
Firstgear Thermo suit.
Ron,
Looking for a Firtsgear Thermo suit, I think a XL would work. Got any and what is the cost.
-
01-06-2014, 07:18 PM
#138
Active Member
Thank you Bajaron!
I just wanna say thank you for your great service and always have time for good and long answer, you are fantastic ! I made this video and there I tell about the anti sway bar from you, and also the EBC rotor and pads to thank you a bit.
-
01-06-2014, 08:16 PM
#139
SpyderLovers Sponsor
![Quote](images/misc/quote_icon.png) Originally Posted by Henning
I just wanna say thank you for your great service and always have time for good and long answer, you are fantastic ! I made this video and there I tell about the anti sway bar from you, and also the EBC rotor and pads to thank you a bit.
I am so glad you got this all together for your trip. It looks fantastic! If you can, post updates as you go along on your trip with pictures if possible. I think we'd all like to go along with you on this ride.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
01-08-2014, 01:45 AM
#140
Active Member
OIL FILTER KIT FOR 2012 RTS
![Quote](images/misc/quote_icon.png) Originally Posted by BajaRon
4 Oil Filters + 4 Seal Kits + 4 Trans Filters - $69.95 - (Includes USPS 1st Class Shipping)
THIS IS THE KIT I WOULD LIKE TO ORDER.
JOSEPH
-------------------------------------------------------------------------------------------------------
Contact Information ~
You can PM me or email me at fyredad@hotmail.com
Email usually gets a quicker answer
Cell Phone: 423-552-3720
------------------------------------------------------------------------------------------------------
Newest Item! Replacement Heim Joint Link Kit - $65.00 delivered to 48 US States. Shipping outside USA varies by destination.
I now carry Chrome Moly Steel replacements for the composite plastic links which attach the Sway Bar to the Suspension (A-Arm). These are direct replacement items and are much stronger and sturdier than the composite plastic OEM links. I have had trouble keeping up with demand for this item. You can contact me at fyredad@hotmail.com
New Chrome Moly Steel Links
Original composite plastic links
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/BadLink_zps17c421d0.jpg)
Can-Am Spyder Sway Bars!
Click on the Link Below to get more detailed information about what a Sway Bar does
http://www.spyderlovers.com/forums/s...-A-Sway-Bar-Do
I now have Custom Performance Anti-Sway Bar kits for all years and models of the Spyder. 2008-2014
Anti-Sway Bar Kit for All 2013~2014 Spyder RS, RSS, ST, STS, ST Ltd. All Models (will not fit pre-2013 Spyders) - $219 (includes shipping to 48 US States - Will Ship Worldwide).
Anti-Sway Bar Kit for All 2013~2014 Spyder RT, RTS, RT Ltd. All Models (will not fit pre-2013 Spyders) - $219 (includes shipping to 48 US States - Will Ship Worldwide).
Anti-Sway Bar Kit for All 2010~2012 Spyder RT, RTS, RT Ltd. All Models (will not fit the 2013 Spyder) - $199 (includes shipping to 48 US States - Will Ship Worldwide).
Anti-Sway Bar Kit for All 2008~2012 Spyder RS, GS, RSS, All Models (will not fit the 2013 Spyder) - $179 (includes shipping to 48 US States - Will Ship Worldwide).
Kits contain everything you need for installation.
PM me here at Spyderlovers.com or email me at fyredad@hotmail.com. I can send a Paypal invoice by email, or you can mail payment. Either way works fine.
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/SB-1a.jpg)
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/SB-2a.jpg)
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/SB-4.jpg)
Contact: You can always get me by PM here at Spyderlovers or by email, fyredad@hotmail.com eMail usually works faster if you're in a hurry but either way I will get back to you.
Here is what I am currently carrying specifically for the Spyder
Oil Filter Kits
Custom Spark Plug Wire Sets
NGK Iridium Spark Plugs
EBC High Carbon Stainless Steel Rotors (I will have more on these soon)
EBC Semi-Sintered brake pads (Not to be confused with their Organic pads)
Custom Performance Anti-Sway Bar - 2008-2012 RS, GS, RSS All Models
Custom Performance Anti-Sway Bar - 2010-2012 RT, RTS, RT Ltd. All Models
Custom Performance Anti-Sway Bar - 2008-2014 RS, RSS, ST, STS, ST Ltd. All Models
Custom Performance Anti-Sway Bar - 2013-2014 RT, RTS, RT Ltd. All Models
Various Riding Apparel - Jackets, Pants, Rain Gear, Electric Heated Gear
Here are a few examples of Motorcycle gear that I carry
Helmets - Arai, Nolan, Scorpion, Shark
Jackets/Pants/Gloves/Boots/Raingear/Heated Gear, etc. - Firstgear - Frogg Toggs - River Road - Speed & Strength
THANKS LAMONT!
This is a great place with great people and I am looking forward to this new endevor.
I've been selling Motorcycle gear on eBay since 1998. Mostly Helmets, Apparal and Exhaust systems. Earlier this year the HiFlo company came out with filters for the Spyder (both Engine oil and Transmission). These are quality products made to exact OEM specs, using the best filter paper in the world (made in Finland). They meet or exceed all OEM requirements.
FILTERS!
HiFlo also produces the K&N filter line of products. I have been very impressed with these filters. Top quality at a great price.
Engine Oil Filter
Oil Change Seal Kit
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/th_SealKit.jpg)
Transmission Oil Filter - This is the Original Size Transmission Filter - I do not have the New, Longer Fiter. If you have the New- Extended Transmission Filter Cap this transmission filter will not fit.
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/HF-559a.jpg)
Least Expensive shipping methods are listed - Faster Shipping is available
SM5 RS/GS/RSS & RT - Engine Oil Filtersw/Domestic Shipping – (48 US States)
1 Oil Filter + 1 Seal Kit -$17.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 1 Seal Kit - $25.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 2 Seal Kits - $29.95 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 2 Seal Kits - $36.95 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 3 Seal Kits - $40.25 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 2 Seal Kits - $46.75 - (Includes Priority Shipping)
4 Oil Filters + 4 Seal Kits - $50.25 -(Includes Priority Shipping)
SE5 RS/GS/RSS & RT - Engine &Transmission Filter sets w/Domestic Shipping – (48US States)
All Transmission Filters include the O-Ring for that filter
This is the Original Size Transmission Filter - I do not have the New, Longer Fiter. If you have the New- Extended Transmission Filter Cap this transmission filter will not fit.
1 Oil Filter + 1 Seal Kit +1 Trans Filter - $22.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 1 Seal Kit + 2 Trans Filters - $36.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 2 Seal Kits + 2 Trans Filter - $40.50 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 2 Seal Kits + 3 Trans Filters - $56.95 - (Includes Priority Shipping)
3 Oil Filters + 3 Seal Kits + 3 Trans Filters - $59.95 - (Includes Priority Shipping)
4 Oil Filters + 2 Seal Kits + 4 Trans Filters - $63.50 - (Includes Priority Shipping)
4 Oil Filters + 4 Seal Kits + 4 Trans Filters - $69.95 - (Includes Priority Shipping)
International Orders
~ Canada ~
Engine Oil Filters
1 Oil Filter + 1 Seal Kit - $18.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 1 Seal Kit - $27.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 2 Seal Kits - $30.95 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 2 Seal Kits - $39.50 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 3 Seal Kits - $42.50 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 2 Seal Kits - $46.25 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 4 Seal Kits - $52.95 - (Includes USPS 1st Class Shipping)
~ Canada ~
Engine & Transmission Filter sets
All Transmission Filters include the O-Ring for that filter
This is the Original Size Transmission Filter - I do not have the New, Longer Fiter. If you have the New- Extended Transmission Filter Cap this transmission filter will not fit.
1 Oil Filter + 1 Seal Kit + 1 Trans Filter - $23.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 1 Seal Kit + 2 Trans Filters - $38.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 2 Seal Kit + 2 Trans Filters - $41.95 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 2 Seal Kit + 3 Trans Filters - $56.50 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 3 Seal Kit + 3 Trans Filters - $59.50 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 2 Seal Kits + 4 Trans Filters - $65.25 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 4 Seal Kits + 4 Trans Filters - $69.95 - (Includes USPS 1st Class Shipping)
All other International Locations
Engine Oil Filters
1 Oil Filter + 1 Seal Kit - $21.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 1 Seal Kit - $34.50 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 2 Seal Kits - $36.50 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 2 Seal Kits - $45.95 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 3 Seal Kits - $48.95 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 2 Seal Kits - $53.50 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 4 Seal Kits - $59.95 - (Includes USPS 1st Class Shipping)
All other International Locations
Engine & Transmission Filter sets
This is the Original Size Transmission Filter - I do not have the New, Longer Fiter. If you have the New- Extended Transmission Filter Cap this transmission filter will not fit.
1 Oil Filter + 1 Seal Kit + 1 Trans Filter - $27.95 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 1 Seal Kit + 2 Trans Filters - $44.50 - (Includes USPS 1st Class Shipping)
2 Oil Filters + 2 Seal Kit + 2 Trans Filters - $47.95 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 2 Seal Kit + 3 Trans Filters - $61.95 - (Includes USPS 1st Class Shipping)
3 Oil Filters + 3 Seal Kit + 3 Trans Filters - $64.75 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 2 Seal Kits + 4 Trans Filters - $74.25 - (Includes USPS 1st Class Shipping)
4 Oil Filters + 4 Seal Kits + 4 Trans Filters - $79.95 - (Includes USPS 1st Class Shipping)
-----------------------------------------------------------------------------------------------------------------------------------------------------
Custom Ignition Wire Sets for the Spyder
MSD - Red Wire Set - $65.00 Delivered
Accel - Black Wire Set - $72.00 Delivered
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/accel300racewire1.jpg) ![](http://desmond.imageshack.us/Himg205/scaled.php?server=205&filename=msdwire.jpg&res=medium)
NGK Iridium Spark Plugs for All Spyders
DCPR9EIX (Colder Plug) - RS/GS/RSS - $17.00 a set Delivered
DCPR8EIX - (Hotter Plug) - All RT's (Can be used in all Spyders) - $17.00 a set Delivered
![](http://i1216.photobucket.com/albums/dd365/BajaRon/Spyder/NGKIridium.jpg)
---------------------------------------------------------------------------------------------------------------------------------------------------------
High Performance EBC Semi-Sintered Brake Pads and Rotors
EBC Rotors give 18% more friction (stopping power) than OEM rotors. Specially formulated steel compound is highly resistant to warpage.
Pads are made with a new, Semi-Sintered material designed to stop better and last longer than OEM or other Organic pads.
Though the combination of EBC Pads and Rotors will give the maximum benefit it is not necessary to purchase both. These new Semi-Sintered pads will work well with the stock Spyder rotors.
Front Pads - $46.50 (You need 2 sets)
Rear Pads - $35.95
Brake Pad pricing include shipping
Front Rotors - $136.95 (You need 2)
Rear Rotor - $136.95
Rotor pricing include shipping.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Purchasing
Right now I am pretty basic. If you are interested in anything I have listed here or anything having to do with a motorcycle or rider please email me at fyredad@hotmail.com with your request.
Payment - Domestic
Paypal – Personal Check – Money Order
Payment - International
Paypal – Bank Wire Transfer – Western Union
SEE ABOVE FOR ORDER
-
01-08-2014, 02:23 PM
#141
SpyderLovers Sponsor
![Quote](images/misc/quote_icon.png) Originally Posted by GRIPMAN
SEE ABOVE FOR ORDER
Did you get my PM? We need to be sure you have not had the transmission conversion done before we proceed.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
01-08-2014, 05:48 PM
#142
Very Active Member
![Quote](images/misc/quote_icon.png) Originally Posted by BajaRon
Did you get my PM? We need to be sure you have not had the transmission conversion done before we proceed.
I've seen talk of this, how would one know if this is done? Certain years?
Mines a 2013 (yes it's the semi-automatic electric tranny thingy ma bob) lol
-
01-08-2014, 06:35 PM
#143
SpyderLovers Sponsor
Last edited by BajaRon; 01-09-2014 at 11:44 AM.
Reason: Clarification
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
01-08-2014, 07:33 PM
#144
Very Active Member
Thank you Sir.
-
01-09-2014, 11:45 AM
#145
SpyderLovers Sponsor
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
![](signaturepics/sigpic963_3.gif)
![](https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567)
-
01-14-2014, 12:42 PM
#146
Very Active Member
New BajaRon Suspension Jewelry recieved!
Got my new BajaRon one piece endlinks yesterday. Pretty spiffy looking with the engraved logo. Nice job. Waiting on the collars and will install them at the same time.
Thanks!
-
02-05-2014, 12:24 PM
#147
Do you have the oil (Amsoil) and hi flow filters for the 2014's?
I have not looked into aftermarket filters for the 1330cc. I've got everything else for all models and years.
Last edited by BajaRon; 02-05-2014 at 10:03 PM.
-
03-01-2014, 12:37 AM
#148
Just a suggestion.
TS should have a website. so consumers easily select the items sought.
-
03-30-2014, 02:29 PM
#149
Very Active Member
Can you update post number 1 w filter info for ST models, we feel left out and are starting to organize... ![](http://i826.photobucket.com/albums/zz186/willisnowell/smilies/unfair-smilie.jpg)
Lol
-
04-09-2014, 02:16 PM
#150
Heim links
I had a Baja Ron Sway bar installed on my 2013 RT-S, Big change for the better. I had the Heim links changed by the dealer on a recall. Big mistake to trust the composite links. Should replace with Baja Ron links.
Yesterday in the apex of a turn the stock heim link failed. The result was a crash into an on coming SUV. Some how I bounced without injury but the repairs with be in the $6000 range and down time 2 months. Crap stock links.
Last edited by BajaRon; 04-10-2014 at 09:49 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|