-
Very Active Member
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Don't have the video, but here's what I had done
From my 11-16-15 post:
Les (PW2013STL) changed his before the Alaska trip and all went fine without BUDS.
You can read this thread for more info: http://www.spyderlovers.com/forums/s...mission+filter
I did my transmission filter on my 2014 RT Limited at 25,858 miles before putting it away this fall. I did ride it a few hundred miles after the oil/filter and trans filter change (before winter storage @ 26,467 miles) and saw no performance issues with shifting, clutching, etc. I think Les put on about 8,000 plus miles after doing his without any issues.
Hope this helps....BTW I bought my transmission filter from BajaRon - you can save a few bucks on it from Ron vs. your dealer. Ron's trans filter did not come with instructions, but it's very simple. JayBros posted the instructions, here they are (found them for you). Note that there is a sequence to torque the bolts - follow the instructions so you torque them in the proper sequence and to the proper torque spec:
Good luck. I just took my time and torqued the bolts back to spec - all went well. No oil leaks and runs just fine.
My next "challenge" will be installing new spark plugs before riding in the spring - that should be a treat! LOL
Here's a few pics from my install on 10-20-15: Attached Thumbnails
Last edited by Jim&Teresa; 03-23-2017 at 01:19 PM.
Happy and safe rydin'
2014 Spyder RT Limited - January 2014, Cognac/Black Seat, #958, born on 1-8-14
-
Very Active Member
INSTAL VIDEO ---LINK
-
Very Active Member
Here is the one I did, Mike....
http://dochumphreys.wixsite.com/roadster/install
Scroll down towards the bottom.
-
Very Active Member
-
Very Active Member
Man, what a messy job it is, easy, but messy.
2020 RTL SE6
Previously 2008 GS SM5 and 2014 RT SE6
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|