Tools list

[tecnodog7]

Hello All,

First of all I'd like to apologize for this SUPER basic question. As some of you might know I recently picked up at 2009 GS. With that being said i'm completely ignorant on what I need for my tool case in case of emergency (don't have any in the ftrunk)

I am also worried becuase I have put the bike for storage (in a acquaintances garage) and I thought i'd go weekly and start the bike but it's been a month and he's not available and now I'm starting to worried that the battery might be dead so now I need to start thinking about how to take the fairings apart to get to the battery compartment.

This video series does a FANTASTIC job in ilustrating that, but I have saddle bags as well and that's where I'm kinda worried. How will i take the fairings off and the tools which I will need to do so.

http://www.spyderlovers.com/forums/s...pdated-Version


I know I need the T30 allen key for the fairings but I don't know what I need to take off the saddle bags.

Thank you all in advance for taking the time to read this post and replying.

PS- Also if there is anyone in or around NYC who is familiar with the mechanics of the CAN AM and who does work on it, please PM me. I need some work done (brakes seem week and I don't want to take a chance) and I don't want to go to the stealers and rather support community members.

[SpyderAnn01]

It is a T30 Torx that you need. Don't start your bike up unless you can ride it long enough to charge the battery, it is better off left on a tender and not started again until the Spring. In addition to the tool kit that comes with your bike a small compressor and tire plug kit is a good thing to carry.

[Bfromla]

If BRP Mounts & bags there is a special tool with triangle tip to remove the brackets.
Is on my 2013 , not 100% sure if same on earlier, but very well should be

http://www.spyderlovers.com/forums/s...n-Am-Givi-bags

[PistonBlown]

Hello All,

First of all I'd like to apologize for this SUPER basic question. As some of you might know I recently picked up at 2009 GS. With that being said i'm completely ignorant on what I need for my tool case in case of emergency (don't have any in the ftrunk)

I am also worried becuase I have put the bike for storage (in a acquaintances garage) and I thought i'd go weekly and start the bike but it's been a month and he's not available and now I'm starting to worried that the battery might be dead so now I need to start thinking about how to take the fairings apart to get to the battery compartment.

This video series does a FANTASTIC job in ilustrating that, but I have saddle bags as well and that's where I'm kinda worried. How will i take the fairings off and the tools which I will need to do so.

http://www.spyderlovers.com/forums/s...pdated-Version


I know I need the T30 allen key for the fairings but I don't know what I need to take off the saddle bags.

Thank you all in advance for taking the time to read this post and replying.

PS- Also if there is anyone in or around NYC who is familiar with the mechanics of the CAN AM and who does work on it, please PM me. I need some work done (brakes seem week and I don't want to take a chance) and I don't want to go to the stealers and rather support community members.

Looking at the side photo you've got the BRP mounts not the Givi ones so you should have a special triangle tool Bfromla mentions to remove the panniers. The battery on your model should be just behind the left hand rear panel and so is relatively easy to access once the panniers are off.

However also be aware there are battery access terminals under your seat. the idea of these is they provide an easy way to add a trickle charger to keep the battery in shape when left without you having to take the panel off. This may be a better solution for you - particularly as Spyder Ann mentioned you need to give the Spyder a bit of a run to keep the battery happy.

I'm guessing from your post that the tool kit for the Spyder is missing as normally this would contain the T30 for removing the panels and the triangle key for the panniers? I don't carry much beyond the standard kit other than the tire repair stuff Ann mentions, a multi-tool, gaffer tape, cable ties and a length of wire. But if the standard kit is missing we can give a list of the stuff in it.

[tecnodog7]

Thank you all for the valuable feedback. I'm trying to get access to my bike so that I can see what's in there (from what I remember seeing it in there).

However also be aware there are battery access terminals under your seat. the idea of these is they provide an easy way to add a trickle charger to keep the battery in shape when left without you having to take the panel off. This may be a better solution for you - particularly as Spyder Ann mentioned you need to give the Spyder a bit of a run to keep the battery happy.

If this is the case then I won't have to remove the panels in case I need to charge the battery if it does die. Thank you so much, now I just need to get a hand on my bike so that I can see how can I get things done!

[Grandpot]

This is what I do about the tools on all my bikes. Go around the Spyder and pack wrenches that will fit all of the nuts and bolts that you think you will logically remove on the road. Forget about big ones like the axle nut, you won't be doing that on the side of the road. Get a good tire plug kit. If you know how to read a multimeter, throw a cheap one in the kit also.

[tecnodog7]

This is what I do about the tools on all my bikes. Go around the Spyder and pack wrenches that will fit all of the nuts and bolts that you think you will logically remove on the road. Forget about big ones like the axle nut, you won't be doing that on the side of the road. Get a good tire plug kit. If you know how to read a multimeter, throw a cheap one in the kit also.

Thank you. That is some solid advice. I don't know how to read a multi meter (but now would be a good time to learn).

[Bob Denman]

This is what I do about the tools on all my bikes. Go around the Spyder and pack wrenches that will fit all of the nuts and bolts that you think you will logically remove on the road. Forget about big ones like the axle nut, you won't be doing that on the side of the road. Get a good tire plug kit. If you know how to read a multimeter, throw a cheap one in the kit also.

Good advice; but don't forget the Platinum MasterCard!

[tecnodog7]

Good news. I finally got access to the bike and I did find the original tool kit that came with the bike. With that said there is no bikini ( as my friend called it) looking tool for the nut. Attaching the picture of the bolt. So i'll just have to order the tool provided in the link then.
IMG_20170121_151110.jpgIMG_20170121_161409.jpg

[mcalva]

I need for my tool case in case of emergency (don't have any in the ftrunk)

It may be a silly question but ..... Have you looked under the seat? Thats where BRP tools come in my 2011 RT.

Maybe in your model is different than mine.

[billybovine]

It may be a silly question but ..... Have you looked under the seat? Thats where BRP tools come in my 2011 RT.

Maybe in your model is different than mine.

They are not under the seat on a GS.

[Dan-Am]

...is in the frunk, left side (as you sit), tucked up under the panel, in a rolled up pouch. It is held there with a strap.

[mcalva]

They are not under the seat on a GS.

[TomRobinson]

I just purchased a 2008 GS SM5 for my wife. I also don't think that the OEM Tool Kit is there, but will look again. The stock tool kit is also pretty minimal, so I would like to put together a comprehensive tool kit that includes all of the items that I would need in for a road-side repair. For space, weight, and cost, I only want to gather the items that are necessary. I've read your posts, but still need advice.

What sizes of metric Open & Closed End Wrenches should I have?
Are other Torx Bits needed, besides the T30?
What metric Allen Wrench Bits are needed?
Is it advisable to have metric Sockets? If yes, what sizes?
What size is the Spark Plug Socket?

I really appreciate your advice and help.

[Gwolf]

The tool roll that came with my Spyder was just about useless for anything other than a joke. I got a good tool roll from Amazon, put 3/8 ratchet, sockets, couple extensions, 4 or 5 of most common sockets in metric and SAE, and 4 or 5 or the most common sizes of wrenches. Pair of channel locks, pair of vise grips. It is not real heavy and rolls up fairly small. A good tool roll will have a zipper pocket to hold sockets and small parts. Has enough tools to work on just about anything you run across for emergency repairs. It won't fit under the seat where the OEM tool roll was, but doesn't take up much room in the frunk. That and a CO2 tire plug kit just about covers most emergency repairs. Electrical tape, maybe a few small fasteners. I got a set of hex, torx, and screwdriver bits for the socket set that fit 1/4 magnetic socket. Don't need to carry screwdrivers or nut drives. PDF owners manual and Shop Manual on my cell phone.

Yeah, I carry both Metric and SAE tools in my vehicles. Never know when you might need to change fan belt, thermostat, or some other minor repair that requires SAE.

[Haikanko]

Good torx kit is recommended

[TomRobinson]

Thank you Gwolf and Haikanko. I was hoping for very specific sizes for Open End/Box End, Sockets, Torx, Allen, and Spark Plug wrenches. I could buy a whole set of each type of wrench, and maybe find that there are no fasteners on the 2008 GS SM5 for many of the tools that I'm carrying, and then also find that I still don't have one that is needed.

[Gwolf]

Thank you Gwolf and Haikanko. I was hoping for very specific sizes for Open End/Box End, Sockets, Torx, Allen, and Spark Plug wrenches. I could buy a whole set of each type of wrench, and maybe find that there are no fasteners on the 2008 GS SM5 for many of the tools that I'm carrying, and then also find that I still don't have one that is needed.

Metric 8, 10, 12, 14, SAE 3/8, 7/16, 1/2, 9/16, and a small adjustable for the size you need and don't have.