Are you getting the steering angle and torque sensors reset at the same time as the alignment? Without resetting the sensors (with BUDS) after doing the alignment you can have the effects you guys...
Type: Posts; User: mike3069
Are you getting the steering angle and torque sensors reset at the same time as the alignment? Without resetting the sensors (with BUDS) after doing the alignment you can have the effects you guys...
This comment is on the mark. I had the same experience with my '08 GS. After a lot of thought I concluded that the computer was making adjustments to the sensitivity to the yaw/body roll sensor when...
Hi Mike. Try going to this link http://www.disabledmotorcyclerider.com and check out the kliktronic electric shifter system. This is what I use.
Go to www.mousesavers.com
They have lots of info on any discounts that are available.
No.
The left handle bar button that you use to reset the scrolling screen display before you can start the spyder, is also a "mode" button. When you press it to reset the screen it also will...
'08 GS 40,000 miles
One thing you can do to check if it is the oil sensor switch. Locate the switch on the lower right side of the motor and pull off the wire. The switch operates in a normally "open" position and...
No, I had to go with 175, but no mod required (it JUST fits)
In a word, YES!
P.S.- I put on Faulkin ZE912's, no mods needed. 20k miles and still going strong.
When I installed Ron's sway bar on my RS, I noticed the improvement in the handling on the FIRST corner. I went through the 90 degree corner at the light 1/4 mile from home and was instantly aware of...
Ron, that post just cost me 5 hours and I got my moneys worth out of that link!
P.S. I LOVE my sway bar!
:agree:
One of the "other parameters" adjusted is the sensitivity of the yaw sensor that controls the degrees of body roll allowed before the nanny kicks in when cornering, i.e. when the switch is...
http://twentytwowords.com/2012/08/22/scooter-with-a-train-horn-pictures-and-video/
:agree:
This thread is a great example of what can result from an instance of "misguided" customer service. All of the ranting and back and forth commenting could have been prevented by a better trained and...
Thanks Jesse! That's what I wanted to know.
I need a new rear shock. My question is what is the difference between the rear shock on the RS and the RS-S? The RS shocks are listed as not available until Aug. 15, but the RS-S shock is available...
I don't see Ride-On on the sponsor page anymore.:dontknow:
I think the code was "Lamonster" if you want to try it.
The filter size was increased to allow for a longer oil change interval.
Old (short) filter = 3000 miles
New (long) filter = 5000 miles
I have the "Missing air dam" and a home made deflector to send the heat out the hole in the side instead of on my foot. Also the underside panels have been removed. The panels came off @ 5k miles,...
On my last few rides I have noticed that the DPS seems to not be working well. These have all been hot days. It seems that in a steady state higher speed turn the assist stops working. At first I...
NO! You are not missing a bolt. That is an empty hole on my '08 GS also. nojoke
:thumbup: Happy Anniversary from one survivor to another!
OK ... PM ME too!:roflblack:
Thanks for the "Like" button also!
Over 30k miles on these floorboards and I STILL think they are my best add-on mod.
As others have stated, it should be possible for you to ride with one only arm. You may not need the semi-auto however. I have moved the clutch to the right side on my spyder due to nerve damage in...
Sorry, didn't see you in all that dust or I would have stopped! :D
I was in the vinyl business from 1985 to 1999, started with the very first dedicated vinyl cutter and ended with the latest (at that time) digital printing stuff.
I AM IMPRESSED!!!!!!
Pete has...
What Scotty said!:thumbup: