I know I saw the answer to this somewhere but now I can't find it.
I want to get a 3-position switch matching the rocker switches in the RT switch panel. Can someone provide me a quick link to the right ones on eBay or Amazon?
Also, what is involved in removing that panel holding the switches just below the handlebars, so that I can install and hook up the new switch?
Thanks.
I found this on Amazon. Dimensions: Overall Size: 21 x 15 x 25mm (L*W*H) Mounting Size: 20 x 13mm (L*W). https://www.amazon.com/uxcell-Positi...R4HGD7SCM3ZBRY
Check - Banggood.com ----- Mike :thumbup:Quote:
Originally Posted by UtahPete
It works every time I type it in ..... Banggood.com :dontknow: ....... Mike :thumbup:Quote:
Originally Posted by UtahPete
Okay, I found it. https://www.banggood.com/Quote:
Originally Posted by BLUEKNIGHT911
Now I've forgotten why you thought I should check it out.
Can anyone point me to the thread where this topic (rocker switches and installation) was discussed pretty well?
(This is one of the problems with folks either using a meaningless thread name, or changing the subject on a thread to something completely unrelated - hard to find the relevant info sometimes)
Here are three threads that address you area of interest:
http://www.spyderlovers.com/forums/s...stall-Question
http://www.spyderlovers.com/forums/s...blank-question
http://www.spyderlovers.com/forums/s...Switch-Cluster
By the way, you can use google search to search for threads in spyderlovers by entering something like the following in google search: "spyderlovers.com RT center console switch" (ignore the quotes). You will get a list of links that you can click on to see if any are what you are after.
Rob
Thanks Rob. That's what I needed.Quote:
Originally Posted by robhowen
Here's a video by Can-Am Spyder Accessories showing an RT center console switch (actually in this case, a dual USB port) install https://www.youtube.com/watch?v=pbxnh3VeLL4
Thanks to Pegasus for pointing me in that direction.
After all I've read about this center console switch issue on the forum, I may just go with this small dimmer switch solution from TricLED and mount it somewhere other than the switch panel https://www.tricledusa.com/_p/prd1/4...-dimmer-switch
Pete,
I'm just gonna use the Denali 2.0 Switch Eliminator (since it also integrates with the Denali lights I'll be using) and always have the lights on full, but aimed down low enough to not be in other drivers eyes, is the point of your switch to allow the lights to be off even when the bike is running? I think they even have a relay that brightens/dims based on Hi or Low beam use.
I've been looking at that. Let me know how it works out.Quote:
Originally Posted by DGoebel
heres one I kept track of that has some good hints on that & other subjects:Quote:
Originally Posted by UtahPete
http://www.spyderlovers.com/forums/s...fe-s-2013-ST-S
Here are some switches that i found at a local power sport dealer looking to get installed myself on a project : https://www.modquad.com/product/switch-rocker/
Here's what I did...Quote:
Originally Posted by UtahPete
http://www.spyderlovers.com/forums/s...-t-last-a-week!
Thanks. I wouldn't have thought to look on that thread.Quote:
Originally Posted by Jetfixer
I would rather that BRP put a power receptacle in that middle position, instead of in the frunk. It wouldn't cost much to re-route the wiring from the frunk to the cockpit.
For that matter, why is there a power receptacle in the frunk in the first place? (Talking about RT's)
:agree: ....That's why I moved my MP-3 plug from the Frunk to inside the glove box ..... There is just enough wire in the Audio rear harness to do this ..... Mike :thumbup:Quote:
Originally Posted by Fat Baxter