• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

YIKES I think I broke my spyder?

quantumleap39

New member
driving home today, and the "check DPS" and the "ABS fault" started to scroll, then the "limp home mode" scrolled. I noticed that the engine light was flashing, the abs light was on and the one below it (squiggley spyder lines). :gaah: I shut the spyder off for a bit and all cleared, but then again, they popped back up. a quick turn off, on at a red light cleared the abs stuff but the check dps stayed on. :gaah: I guess I have to call service tomorow,,,
 
Check your relays. Make sure they are pushed in all the way. Better yet, pull them out and re-seat all of them.
 
If that doesn't work, kick the tires...

Just kiddin'...call service and get it in! If you have the BEST warranty, call them and they'll pick your bike up!
 
.
Chances are it's either relays or battery connections. I'm betting battery connections in this case... just because. :yikes:

Relays are just behind the truck area... beneath the removable black plastic cover. You might try switching the three similar relays around while you're at it.

The battery is behind the black side cover just below the seat.
.
 
thanks guys,
I kicked the tires, opened the trunk the 3 black ones were seated well, but took them out and reseated them. The main relay though, slid in almost 1/4 of an inch!!! took it out, reseated. Then put some foam on the inside of the cover and latched it down with velcro. put it back together and it seems to have cleared!!!!!!:clap::2thumbs::2excited:
 
Back
Top