I got the widow pegs from Kuryakan and when I started installing, it said if there is too much slack in the rear peg mount to add the D spring. I added it and now the pin is stuck part way in and I cannot get it in the rest of the way or out. So I have a peg on without the pin all the way through. Any suggestions would be greatly appreciated.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Widow Pegs Help!!!
- Thread starter Questions
- Start date
BLACK WIDOW
New member
PIN
Take a small punch and drive it up from the bottom or take a rubber hammer and drive it down from the top. Something isn't lined up exactly. You may need to wiggle things around a little to get it all lined up.:f_spider:
Take a small punch and drive it up from the bottom or take a rubber hammer and drive it down from the top. Something isn't lined up exactly. You may need to wiggle things around a little to get it all lined up.:f_spider:
wyliec
New member
I too had to use a small punch and wiggle it to line things up.
Although you didn't ask, I would think twice before installing the set srews.
Last edited:
Similar threads
