TricLed Knightrider light

[cyclekid58]

After watching the demo video on TricLed's Facebook page I decided to order the new Knightrider light with 28 different patterns. I ordered mine in white rather than red or blue (didn't want issue with the Leo's), as I will use this for part of my traffic control duties with our PGR. One thing to note is that the light mounts "On top" of the bumpskid protruding lip, not on it. I have the bumpskid here to be put on and the light here today or tomorrow. Once all mounted I will try to post a short video of it in operation as inquiring minds will want to know. I believe it also has a steady on position to use similar to the bumpskid lights hence getting it in white. This will be used in parades as well and in the 2016 Deadwood lighted trike parade.

 

[NM Wrench]

Looking forward to seeing it!

Sent from my VS990 using Tapatalk

 

[Cindy-TricLED]

After watching the demo video on TricLed's Facebook page I decided to order the new Knightrider light with 28 different patterns. I ordered mine in white rather than red or blue (didn't want issue with the Leo's), as I will use this for part of my traffic control duties with our PGR. One thing to note is that the light mounts "On top" of the bumpskid protruding lip, not on it. I have the bumpskid here to be put on and the light here today or tomorrow. Once all mounted I will try to post a short video of it in operation as inquiring minds will want to know. I believe it also has a steady on position to use similar to the bumpskid lights hence getting it in white. This will be used in parades as well and in the 2016 Deadwood lighted trike parade.

Thank you Cyclekid! I hope you like it.



Sent from my iPhone using Tapatalk

 

[Larry rt]

Is video going to include install?

 

[Bob Denman]

We're waiting to see the glorious results! :2thumbs: Good luck!
:bbq::bbq::bbq:

 

[Buckeye Bleau]

Thank you Cyclekid! I hope you like it.



Sent from my iPhone using Tapatalk

cindy, I hope to meet you one day, you are a big help, and a kind person, I am saving my pennies just to buy some sparkling Farkles from you very soon. I am just having problems figuring out what I need to buy to do what I want.

Joe

 

[Jdr00ejr]

Cindy and the TricLED Team are amazing! Great customer support. I ordered one in Red and installed it on my Victory Vision. Takes a bit of time to cycle through all the options it has - so when you pass the one you wanted, patience is a virtue as you press the button over and over again. ;-) The nice thing is it remembers the last option it was on - so when you shut it off and turn it back on - it goes back.

It does have a solid on option - so you can use it up front as added lights as the OP talked about. I've only found that 3 of the 4 buttons on the remote do anything (unless I'm dense). The top right button turns it on and off. The bottom right button doesn't seem to do anything for me. The other 2 buttons cycle the light option as well as the speed of the option.

Will be nice to see the OP's thoughts and videos when posted.

 

[cyclekid58]

Knightrider

Cindy and the TricLED Team are amazing! Great customer support. I ordered one in Red and installed it on my Victory Vision. Takes a bit of time to cycle through all the options it has - so when you pass the one you wanted, patience is a virtue as you press the button over and over again. ;-) The nice thing is it remembers the last option it was on - so when you shut it off and turn it back on - it goes back.

It does have a solid on option - so you can use it up front as added lights as the OP talked about. I've only found that 3 of the 4 buttons on the remote do anything (unless I'm dense). The top right button turns it on and off. The bottom right button doesn't seem to do anything for me. The other 2 buttons cycle the light option as well as the speed of the option.

Will be nice to see the OP's thoughts and videos when posted.

It arrived in todays mail, did a quick test to make sure all was working correctly since I still have to get the bumpskid on next week. OMG this thing is bright and lots of different patterns including one that will work great for traffic control. Not sure about an install video as my mechanical skills usually lead to saying a lot of bad words! I will do pics of that and video the test run of it in place.

 

[RotaxDuramax]

Wouldn't mind something like that for the spot on the front of the F3 that's normally red. I mean, the Special Series already kinda reminds you of KITT anyway.

 

[cyclekid58]

Knightrider in White

It arrived in todays mail, did a quick test to make sure all was working correctly since I still have to get the bumpskid on next week. OMG this thing is bright and lots of different patterns including one that will work great for traffic control. Not sure about an install video as my mechanical skills usually lead to saying a lot of bad words! I will do pics of that and video the test run of it in place.

I have a video but cannot figure out how to upload it, I have clicked on the video icon, it wants a url address, Have it on my desktop so tried doing the path which didn't work. Pics have an option to locate them
but video does not, can anybody give me and Idea on what to do?

 

[CapeSpyder]

If i'm right videos have to come from youtube. thats were i put mine and then it would show here
Kermit

 

[cyclekid58]

Knightrider in White

I have a video but cannot figure out how to upload it, I have clicked on the video icon, it wants a url address, Have it on my desktop so tried doing the path which didn't work. Pics have an option to locate them
but video does not, can anybody give me and Idea on what to do?

Thanks to CapeSpyder for the tip! The knightrider light was easy to mount right on top of the bumpskid, works well except the remote is a bit finicky not wanting to change between some patterns unless right up against the sensor in the upper right corner of the bar. It is very bright at night and still shows up in bright sunlight. I like being able to use it in steady mode like a bumpskid light.

 

[Cindy-TricLED]

cindy, I hope to meet you one day, you are a big help, and a kind person, I am saving my pennies just to buy some sparkling Farkles from you very soon. I am just having problems figuring out what I need to buy to do what I want.

Joe

Hi Joe! Hope to meet or talk to you soon!
You can always contact me via email or call the number listed on our site


Sent from my iPhone using Tapatalk

 

[Cindy-TricLED]

Wouldn't mind something like that for the spot on the front of the F3 that's normally red. I mean, the Special Series already kinda reminds you of KITT anyway.

Rotax, you can use the night-rider car for your F3. We have installed this for customer before. See pic below..

Sent from my iPhone using Tapatalk

 

[Cindy-TricLED]

Thanks to CapeSpyder for the tip! The knightrider light was easy to mount right on top of the bumpskid, works well except the remote is a bit finicky not wanting to change between some patterns unless right up against the sensor in the upper right corner of the bar. It is very bright at night and still shows up in bright sunlight. I like being able to use it in steady mode like a bumpskid light.

Cyclekid.. If you keep have issue with remote, please contact us via email. We will take care of it.


Sent from my iPhone using Tapatalk