Rider 550 comes with ram ball clamp. All you need is a standard ram ball. I’ve got one on my 2014 rts, very happy with it.I’ve been seriously looking at the Rider 550, but not sure how to mount it on my 2014 RT. I’ve contacted RAM and they tell me that they do NOT have a cradle for the 550. Not sure if I would trust an “X” grip. Suggestions?

I took your word for it, and just got a new one today.....the documentation that came with it sucked, but so far, after searching, I’ve been able to figure out what seems to be everything I need to know. Not too sure where I’m going to grab power from on my ‘14 RTS, but I’m sure that I’ll figure that out too. I was hoping to be able to grab power from my added USB plug but from what I read, they don’t recommend it (not enough go juice). Otherwise, it seems to be just fine. I’ve got a RAM mount on my dash, so I’ll just mount to that. It will be hanging just over the speedo.no issues for me, I’m happy with it. I bounce between the 550 and my Tom Tom iOS app. Depending on weather and length of trip.
Under the tupperware at the back right corner of the gas tank there are two GPS connections. One is 12 volt power coming from the radio and the other is an audio input to send GPS audio into the radio. You can connect any GPS to the audio and if your GPS uses 12 v power you can use it also. Easier than going down to the battery.Not too sure where I’m going to grab power from on my ‘14 RTS, but I’m sure that I’ll figure that out too.
I plug mine into my USB adaptor...5 volt 2.1 amp and seems to work fine.
Cool. Thanks. Is the mini usb plug in directly on the bottom of the gps?