Tire change, belt and muffler/exhaust Question

[PinkRosePetal]

..... The manual doesn't show the caliper disassembled for me to check this for you ....

I was trying to save you some dollars a few posts back! It's not in my manual either.

I'd remove the arm and fit it one or two splines anti-clockwise. Personally I'd try two splines first, if it's ok, fine, if not one spline is the way to go.

 

[bayoumanPIBE]

Hey, I haven't forgotten about this. I just have not had a chance to try. As for now, the parking brake seems to have gotten much tighter and the bike does not move like it did.

I have no idea why. But, I still want to take this apart and check it out. I'm sure it will get loose again.

Thanks ya'll!!

 

[Mikey]

They didn't take the brake line off the caliper did they, if so they may have air in the lines! Brakes can be a pain as long as you go threw the steps you'll be ok! Like a friend of mine told me, it's only nuts and bolts!!!!:cheers: You'll get it, and there's some pride in knowing you can do a better job than the last monkeys did!!!! You go

 

[ARtraveler]

There are two official dealers and two independent service centers in the MO/AR area. There is only one that I would not consider going to. Three have good reputations.

Please PM me and let me know which dealer you are dealing with. I am curious.

 

[Revalden]

There are two official dealers and two independent service centers in the MO/AR area. There is only one that I would not consider going to. Three have good reputations.

Please PM me and let me know which dealer you are dealing with. I am curious.

I wanna know too. Please.