What could/would be the consequences if I were to remove the exhaust tip (stock ST exhaust) and drill 1/4 inch holes in the muffler to allow for a bit more flow. I've doe this on previous bikes I've owned and had great results with improved flow and a nice rumble without having to re map. Any and all responses are greatly apreciated.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Stock Exhaust Mod
- Thread starter chief1949
- Start date
SPYD3R
Active member
WHICH
WHICH MUFFLER...?
RT, RS, etc....
i'll send you pix of the insides if you let me know which 1 u have.... :thumbup:
Oops, sorry, just notice you have an ST....
here are some pix...
these things are built to resist earthquakes and tornadoes.... absolutely BULLET-PROOF....
drilling 1/8" holes will get you nowhere... there are 3 180 degree reverses... gut the thing, and install a glass pack like i did...
WHICH MUFFLER...?
RT, RS, etc....
i'll send you pix of the insides if you let me know which 1 u have.... :thumbup:
Oops, sorry, just notice you have an ST....
here are some pix...
these things are built to resist earthquakes and tornadoes.... absolutely BULLET-PROOF....
drilling 1/8" holes will get you nowhere... there are 3 180 degree reverses... gut the thing, and install a glass pack like i did...
Last edited:
ST exhaust mod
ST exhaust looks like the one in the pics. Like your idea with the glass pack. If you have more pics to completion it would be greatly appreciated. The drilling I could do myself, the glass pack mod I'd have to go to a muffler shop and would want to have as detailed instructions as possible.
Thanks a million this is exactly the type of info I was looking for.
ST exhaust looks like the one in the pics. Like your idea with the glass pack. If you have more pics to completion it would be greatly appreciated. The drilling I could do myself, the glass pack mod I'd have to go to a muffler shop and would want to have as detailed instructions as possible.
Thanks a million this is exactly the type of info I was looking for.
I removed the stock exhaust tip and drilled 5/8 inch holes completely thru into the muffler. There are two (2) plates to drill thru the outer one you can see and another one a couple of inches after you drill thru the first.
Just the improvement in sound I was looking for. No impact on performance that I can tell. I did notice some improvement in gas mileage but I'm guessing that's just a result of break in, as I have less than 2500 total miles.
Last edited by a moderator:
Drilling holes in exhaust
Hey folks. I actually did this today on a '15 RT LTD. There are actually 3 layers to drill through. I did q4 1/2 inch holes. I put them at about the 12, 2, 6 and 9 positions. The short of it is, now I have a muffler that sounds like it has a hole in it. Just without the rattle that goes along with a burnt or rusted out muffler. As for the 90 degree tips, with them pointed down you get echo off the ground or garage floor. If you remove them, all of the noise goes straight back instead of bouncing off the ground.
The holes do offer a slight drone at idle and low RPM. At speed, I couldn't tell a difference.
Now for me, I came across this video of a Spyder with a glass pack.
https://www.youtube.com/watch?v=JBUY7Q8XZAo.
Personally, I like the sound. More of the Harley / Indian tone to it. The glass pack is about $35 at Advanced Auto. Since I ride solo 80% of the time, I will probably go this route.
Thanks for ALL of the tips and info. Lots of great info here.
DJ
Hey folks. I actually did this today on a '15 RT LTD. There are actually 3 layers to drill through. I did q4 1/2 inch holes. I put them at about the 12, 2, 6 and 9 positions. The short of it is, now I have a muffler that sounds like it has a hole in it. Just without the rattle that goes along with a burnt or rusted out muffler. As for the 90 degree tips, with them pointed down you get echo off the ground or garage floor. If you remove them, all of the noise goes straight back instead of bouncing off the ground.
The holes do offer a slight drone at idle and low RPM. At speed, I couldn't tell a difference.
Now for me, I came across this video of a Spyder with a glass pack.
https://www.youtube.com/watch?v=JBUY7Q8XZAo.
Personally, I like the sound. More of the Harley / Indian tone to it. The glass pack is about $35 at Advanced Auto. Since I ride solo 80% of the time, I will probably go this route.
Thanks for ALL of the tips and info. Lots of great info here.
DJ
Similar threads
