Would like to go with flush mounted but have not seen anyone mention them. Getting ready to ask a couple companies if they can make some if any universal kits don't fit which I highly doubt. I dont have any hard bags and no plans to get them. I want to take the rear turns and make them flush with the panels..of course sticking out a bit like a bumb. Anyone know of anythig that will work?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Rear Turn Signals
- Thread starter patches
- Start date
SPYDERGUY1
New member
lights
have a look at some of the auto parts supply stores, lights that may work would be grote, techspan, sorry been away from the business, but that should set you in the correct direction. good luck.:chat:
have a look at some of the auto parts supply stores, lights that may work would be grote, techspan, sorry been away from the business, but that should set you in the correct direction. good luck.:chat:
SpyderWolf
New member
How about the small bullet lights from Kewl Metal?
http://www.kewlmetalstore.com/product_info.php?cPath=5_37&products_id=487
Is that anything like what you might want?
http://www.kewlmetalstore.com/product_info.php?cPath=5_37&products_id=487
Is that anything like what you might want?
Thanks. The KM are not flush to the tupperware, they still stick out. I want more of a bubble of a light that sits on top hole where the current light rods come through today. Will keep looking. Have a couple of ideas but most of the generic lights from the shops in the area do not fit over the hole entirely.
Magic Man
Registered User
If you get The Street Magic Tail Light Conversion and the All In One Unit then you don have to have anything on the back of bike at all.
The All In One Kit comes with block off covers for the old turn signal area too.
This will not only allow you to clean up the back of your bike but to have the upgraded tail lights as well.
http://www.esicycleproducts.com/spydertaillightpgradeandallinone.html
MM
The All In One Kit comes with block off covers for the old turn signal area too.
This will not only allow you to clean up the back of your bike but to have the upgraded tail lights as well.
http://www.esicycleproducts.com/spydertaillightpgradeandallinone.html
MM
