IDApharmer
New member
is there a wiring adapter harness to go to 4 pin from can am RTL bike
Last edited by a moderator:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
pulling a aftermarket cargo trailer - is there a wiring adaptor?
- Thread starter IDApharmer
- Start date
billybovine
Active member
You do not say what the connector is on the trailer.
If it is a flat 4. You can cut it in half. Fold it over. Tape the 2 halves together. Never done this myself but has been posted several times as working. You can also make your own adapter. Order a Hopkins square four trailer plug online and a flat 4. Just connect the same color wires together.
If it is a flat 5 or round connector. The answer gets far more complicated. So if that is the case. Just let us know what you have.
If it is a flat 4. You can cut it in half. Fold it over. Tape the 2 halves together. Never done this myself but has been posted several times as working. You can also make your own adapter. Order a Hopkins square four trailer plug online and a flat 4. Just connect the same color wires together.
If it is a flat 5 or round connector. The answer gets far more complicated. So if that is the case. Just let us know what you have.
"click: https://www.lamonstergarage.com/can-am-spyder-trailer-harness-adapter-lamonster/ 4 pin to flat 4 adaptor
Similar threads
