Need some screws for Left Combo switch - part number?

[f110tech]

2015 RTL, does anybody have a part number for the screws that go into the left combo switch (headlight, turn signal)? Or does anybody have some used ones from a parts bike?
When I took ownership of my bike it was missing 3 screws and the dealership said they are on order, but they are sure taking their time getting them to me.

Would be nice if I could just button it up for good and forget about it.

 

[racoon]

It has one (or more) screws left in the switch?

Take one out and go visit your local hardware store and see if they have a screw that will work.

 

[2dogs]

I added a mount to my left "combo switch" and needed longer screws than the OEM screws. I went to Ace Hardware and found exactly what I needed.

 

[BLUEKNIGHT911]

It has one (or more) screws left in the switch?

Take one out and go visit your local hardware store and see if they have a screw that will work.

:agree: ....or look at the parts fiche' for your Spyder they will list all the parts in that Switch ....Mike :thumbup:

 

[racoon]

....or look at the parts fiche' for your Spyder they will list all the parts in that Switch

1) if you have access to a parts fiche
2) and then you have to order the part from a dealer...and wait...

or just run to Lowe's or Home Depot or Ace

 

[BLUEKNIGHT911]

1) if you have access to a parts fiche
2) and then you have to order the part from a dealer...and wait...

or just run to Lowe's or Home Depot or Ace

The parts Fiche ' - go to ...canamoemparts.com ..... look up your year & model spyder .... find the page that shows the module .... see what screws/bolts you are missing .... look at the right list of parts ... it will tell you what type and size they are.... you order them from the website or get the sameones at a good hardware store ..... Mike :thumbup:

 

[f110tech]

It has one (or more) screws left in the switch?

Take one out and go visit your local hardware store and see if they have a screw that will work.

I tend to steer clear of this unless I can find replacement hardware in mid to high grade. I refuse to spend 99 cents on a bag of hardware from a big box store and then have the head strip or the shank snap. Sometimes I can find nice metric hardware at ACE as mentioned by another member, but ACE is a trip from my house. I might just take a ride there and look though. Still not sure if they are all the same length though. I guess I can play around with it.

:agree: ....or look at the parts fiche' for your Spyder they will list all the parts in that Switch ....Mike :thumbup:

Nope, not in this case. That is the first place I looked of course.

 

[Snoking1127]

If you want screws you are going to have to source them yourself, as the control comes as a single complete unit. If my Spyder was not in the hospital I would pull screws and give you the dimensions, maybe someone else will do that for you.

 

[f110tech]

That is what I was worried about. OK, it has a few screws left it in. I will move them around carefully and see if they are all the same length.
Thanks everyone!

 

[Quickdraw]

2015 RTL, does anybody have a part number for the screws that go into the left combo switch (headlight, turn signal)? Or does anybody have some used ones from a parts bike?
When I took ownership of my bike it was missing 3 screws and the dealership said they are on order, but they are sure taking their time getting them to me.

Would be nice if I could just button it up for good and forget about it.

Try here.

https://www.canampartshouse.com/oem...022084623d4e/2015-spyder-rt-limited-se6-parts

 

[Snoking1127]

Try here.

https://www.canampartshouse.com/oem...022084623d4e/2015-spyder-rt-limited-se6-parts

Only the complete assembly is listed!

 

[Quickdraw]

What I could find out was that the screws that hold the throttle assembly together are M4x25. I would guess that would be close for the blinker assembly as well. They may not be 25mm long (1 inch), but I'm guessing they're still M4 thread. You can get those at any hardware store.

 

[cruisinTX]

Hardware stores like Lowe's may or may not have what you need. Look around your area for specialty stores like Fastenal and take them a sample of what you need. Here where I live, we have a few shops that specialize in fasteners for all of the industrial complexes nearby.