Limp Mode ?

[StriperKing]

I have done lots of mods to my RT and have had it apart for a while working on it and waiting for parts, etc. so I was done with everything today including adjusting my belt tension and installing my belt tensioner. The last thing I had to do was adjust my belt alignment so I jacked it up and got started so I could take it for a test drive. To make a long story short I got in a hurry and forgot to remove the ABS sensor. I knew to do this but just sliped my mind. Now I am in limp mode because of it. I did the three on-off key thing to no avail so I disconected the positive on the battery and still can not get it to clear. Any help would be appreciated.

 

[Lamonster]

Just drive it a bit and it should clear itself.

 

[StriperKing]

Thanks Lamont I will try that.

 

[StriperKing]

Thanks Lamont if you see this. You were correct, I took it down the road today and everything cleared up within 20 feet of the driveway. That is what is so great about this site, lots of help, good info, and great people! :firstplace: