• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Help who has had this problem

RudyB

New member
2bd29f197e40f236f7b15fc412b86c77.jpg
Hard steering check eng lite on dynamic power steering indicator on who has this problem 2014 RT


Sent from my iPhone using Tapatalk
 
Spyder Diagnostic Codes - P0562
System voltage Low

Alternator defective
or not connected
Battery failure; an
external battery charger
may have been used.
Damaged circuit wires or
connection.

Measure battery voltage with
engine stopped (expected
value: 11 to 13 volts).
Measure battery voltage with
engine running (expected
value: 13 to 14.7 volts).
Check connections
on voltage regulator.
Check ground and positive
connections on battery.
Check ground on vehicle frame.
 
P0562

Spyder Diagnostic Codes - P0562
System voltage Low

Alternator defective
or not connected
Battery failure; an
external battery charger
may have been used.
Damaged circuit wires or
connection.

Measure battery voltage with
engine stopped (expected
value: 11 to 13 volts).
Measure battery voltage with
engine running (expected
value: 13 to 14.7 volts).
Check connections
on voltage regulator.
Check ground and positive
connections on battery.
Check ground on vehicle frame.

Can anyone clarify, why connecting and external battery charger could cause this code?

(
Battery failure; an
external battery charger
may have been used.

Two days ago I hooked up my battery tender. This morning, I disconnected it ( it has the quick plug and go type connector) and started the bike. The check engine light came on and I got the handle bar warning light. Checked and got the P0562 code. I checked voltage not running and it is 12.86. Running it is 14.26. Perfect I would say. I shut it off, restart and all is fine for about a minute, then it comes on again. Tried disconnecting battery for a bit, that didn't help. Any ideas? Thanks guys. Enjoy reading this forum. The operators manual covers charging, replacing and boosting, but no mention it will start throwing codes.

 
Last edited:
SpyderCodes now costs for Apple phones, but atm is still free for Android phones... ;)

But we have been told that the next upgrade means it will cost for Android phones too! :sour: However, that doesn't take away from the fact that it'll still be Cheap at twice the price! :2thumbs: It is a very useful & handy app that can save you a lot of worry & dollars! :thumbup:
 
Back
Top