• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Harness for trailer installed on 2020 RTL

m109anc

New member
Had the trailer harness installed on my 2020 RTL, plugged up trailer and the lights don't work. I pulled out my 12v tester, had someone press the brake while put the alligator clip on the ground terminal, then touch the other three terminals nothing. I repeated this with the turned signal, running lights, nothing. Any ideas what could be wrong?
 
It’s not plugged in! Check fuses. Or, the module is defective. Do you know anyone with an F3T that has a trailer module? Unplug yours, plug in theirs. Test trailer. Same module. I’ve done several, no problems. I’m up, call.
 
If you paid someone to do this, take it back and tell them to do their job. Then have them show you that it is working. Don't accept faulty or shoddy workmanship.
 
Check the fuse. Refer to the owners manual for the specific fuse. Normally a 10 amp. If it is there and good. I would agree with Stubby. Take it back to the installer and tell them to fix it.
 
Back
Top