good morning Spy-merica,need help

[hsteil]

one of my friends on the german site is trying to find out the hole diameter in the rim through which the
inflation valve goes. he is trying to mount an angled valve with the next tire change, but there are various dimameters available. if someone has this info, please post, inch or metric, does not matter.

thanks,Peter on F3 'Nitecrawler'
Schriesheim/Germany

 

[IGETAROUND]

one of my friends on the german site is trying to find out the hole diameter in the rim through which the
inflation valve goes. he is trying to mount an angled valve with the next tire change, but there are various dimameters available. if someone has this info, please post, inch or metric, does not matter.

thanks,Peter on F3 'Nitecrawler'
Schriesheim/Germany

Sorry can't get specific size but this is the part # for the valve stem: 705400193 Rim Valve with Cap for RS Std model. Can't believe they are any different sized for the other models as the rim sizes are the same front and back model to model. Might check wit cheapcycle parts on the web if you don't have a dealer handy to access. Hope this helps:gaah:

 

[hsteil]

thank you

Sorry can't get specific size but this is the part # for the valve stem: 705400193 Rim Valve with Cap for RS Std model. Can't believe they are any different sized for the other models as the rim sizes are the same front and back model to model. Might check wit cheapcycle parts on the web if you don't have a dealer handy to access. Hope this helps:gaah:

THANKS FOR TAKING THE TIME TO WRITE. SHORTLY AFTER POSTING, BECAUSE THE INFO NEEDED WAS TIME SENSITIVE (I KNOW, SOME ARE ALWAYS IN A HURRY)
I CALLED LAMONSTER GARAGE VIA SKYPE, AND THANK YOU SO MUCH, GOT THE ANSWER.
FOR FUTURE REFERENCE, THERE IS A 8. SOMETHING MM AND AN 11MM ANGLED VALVE ON THE MARKET, WHICH WOULD MAKING INFLATING THE REAR TYRE MUCH MORE EASY.

BEST REGARDS AND A RIDE SAFE,

PETER ON 'NITECRAWLER'
F3, SCHRIESHEIM, GERMANY