Fender Lights

[Tony8472]

After Christmas I'm going to be switching out all my reflectors for lights. I have a 2014 RT with the original style fenders. I have found the lights that replace the reflectors on the side of the fender but is there one for the reflector on the back of the fender? The one that faces towards the back? I can't seem to find one.

 

[stevedfive]

TRICLED.COM is on the vender list on the HOME page

 

[Tony8472]

TRICLED.COM is on the vender list on the HOME page

Thanks but I'm looking for the light for the original style fender. I thought I had seen it before on the TRICLED site but it isn't there now. I've sent them an email asking if I'm imagining things or if they are just out of stock.

 

[stevedfive]

Custom Dymamics sells the mud flap replacement light, non reflectorized.
http://www.customdynamics.com/can_am_spyder_led_lighting.htm#LED_Front_Mud_Flap_Replacement_Kit_

 

[Marker]

Here is the link http://www.customdynamics.com/dual_color_magicflex_channelz.htm
Custom Dynamics has all the lights for the fenders both old and new style fenders.

 

[Bob Denman]

Didn't Inspector Gadget offer one also? :dontknow:

 

[SpyderAnn01]

Tony, you will need the Custom Dynamics lights.

 

[Ben Burped]

Go with Custom Dynamics

Custom Dynamics makes an excellent product. I walked around at one of Lamont's barbecues and took pictures of the different lights because there were too many different options to remember. The product that stood out was Custom Dynamics. I went with the front and rear Brightsides, The mud flap lights, and the high mount brake light. They give you reasonable instructions and a special 3M adhesive activator to make sure everything sticks like it was from the factory. Go slowly, take the fenders off, trial fit everything several times and then enjoy the fact that you will have a high quality lighting product that looks like it was from the factory. While you are at it, add the adapters to make all the lights flash with your signal lights. You will increase your safety factor tremendously. Finally, all my friends know with just a glance that it's me.

 

[rick_w]

Custom Dynamics makes an excellent product. I walked around at one of Lamont's barbecues and took pictures of the different lights because there were too many different options to remember. The product that stood out was Custom Dynamics. I went with the front and rear Brightsides, The mud flap lights, and the high mount brake light. They give you reasonable instructions and a special 3M adhesive activator to make sure everything sticks like it was from the factory. Go slowly, take the fenders off, trial fit everything several times and then enjoy the fact that you will have a high quality lighting product that looks like it was from the factory. While you are at it, add the adapters to make all the lights flash with your signal lights. You will increase your safety factor tremendously. Finally, all my friends know with just a glance that it's me.

I agree. We sell those LED Fender Lights, but we also have them on our own RT.
When I follow our RT all I see is those Fender Lights. They are really bright and draw your attention more then all of the other lights that are on the back of our RT.
Fairly easy to install. You will need to remove the wheels, takes a little bit but not extremely complicated.

 

[Tony8472]

Thanks everyone. This is a great help. I knew I saw it somewhere.

 

[NorCalBud]

Is more needed to get these to blink?

Would anyone happen to know if you also need the "Full LED Illumination Modules with Blinker (pr)" in order to get these to blink as a turn signal? If I get the Amber brightsides (I have a 12 RTL) can I wire it together wit the same module for the Mud Flap light and save some coin?
Thanks in advance and Merry Christmas!!!

 

[SpyderAnn01]

Would anyone happen to know if you also need the "Full LED Illumination Modules with Blinker (pr)" in order to get these to blink as a turn signal? If I get the Amber brightsides (I have a 12 RTL) can I wire it together wit the same module for the Mud Flap light and save some coin?
Thanks in advance and Merry Christmas!!!

If you purchase from Custom Dynamics you will need the Custom Dynamics® Spyder Fender RT TIPS Kit which allows all of the fender lights, side rear and strip to operate as turn signals. The price is $64.95 and you can also order white or amber lights to change out the actual tip light so that it matches. The price on that is $27.00 if you order with the TIPS kit.

The Custom Dynamics® Spyder RT Front Fender TIPS Kits are now available!​

TIPS kits will convert the front fender tip marker light on your Spyder RT into both a running light, and full function turn signal.

Price is $64.95​

 

[NorCalBud]

Thank you for the info!
I'm ordering the whole shooting match.... Mud Flap, Tips, Bright-sides, along with the 3 color fender strip...Oh Yah!!!! :yes::clap: