CanAm Spyder F3 F3S LED Headlight Upgrade or Stock Bulb Install Video

[SpyderHands]

Alright guys and gals...

Though it is not exhaustive nor does it provide frame by frame details (and very few do), I have prepared this quick reference "install" video when upgrading to the LED Headlights (or switching out your H4 stock lamps) on our 2015 CanAm Spyder F3S. Though not all inclusive, I believe you will gain sufficient insight as to the approach and direction to take prior to tackling this little DIY job.

NOTE: I started recording this video post disassembly after I had already taken the F3S apart, yet I believe it is rather easy to follow.

It is my hope that it will provide a "helping hand" to you and yours.


Click Here to View Video on YouTube:
https://youtu.be/yHfuqCG-xjg


Stay safe out there SpyderLover Riders!!!

 

[TexasZ]

Awesome info, thanks so much for taking the time to put this on video for us! Very helpful!!!

 

[Roadster Renovations]

Wondering if it is possible to remove the headlight assemblies far enough for access? They usually give enough slack in the plug to do that. That way the front trim piece above the light would be all needed removed to get to the assembly. Might have to disconnect the adjustment cable from the securing location.
May not be possible to do it that way.
Thanks for a very awesome video.