Anyone know who makes the OEM CB Antenna?

[Tommy]

Anyone know who makes the OEM Factory RT CB Antenna? I need to replace one and BRB used m6 threads and most Antennas are 3/8. Would be nice to contact the supplier/manufacturer to get a replacement. I also thought about drilling the "Block" and taping it to a 3/8 x24 but thought I would look here first.

Thanks

 

[bigbadbrucie]

Sorry, I’ e had my ‘14 RTS now for 8 years now, and this is the FIRST post that I’ve seen that refers to an OEM CB antenna. I didn’t realize that there was such a beast. I just assumed that they were aftermarket. In any event, to answer you post, I do not know. The last m/c CB that I had was on my ‘93 Gold Wing.

 

[BLUEKNIGHT911]

Anyone know who makes the OEM Factory RT CB Antenna? I need to replace one and BRB used m6 threads and most Antennas are 3/8. Would be nice to contact the supplier/manufacturer to get a replacement. I also thought about drilling the "Block" and taping it to a 3/8 x24 but thought I would look here first.

Thanks

Well the OEM speakers in my 14 RT were made by " RSI ", I think the radio also .... the CB might have been too .... JMHO .... Mike :thumbup:

 

[Flamewinger]

Try asking https://www.sierra-mc.com/products.asp?cat=18

 

[Tommy]

Try asking https://www.sierra-mc.com/products.asp?cat=18

I think John is getting out of the Spyder options as he has just BRP BT devices. Also he had an antenna option but that was a few years back. I think I will just drill and tap the block for a standard 3/8 antenna.

 

[Tommy]

Thanks Mike...
its looking like I will just drill and tap the block for a standard 3/8 antenna. This gives me many options..

 

[IdahoMtnSpyder]

Thanks Mike...
its looking like I will just drill and tap the block for a standard 3/8 antenna. This gives me many options..

That's what I did. I used a Firestik brand no ground plane antenna. Only challenge was tucking 17' of coax under the plastic below the passenger seat.