Any Windscreen tint suggestions? Spray products? Any better ways?

[MONK]

I currently have a stock height F4 windscreen on my 2021 RT. Summer here in NC gets a bit warm so I bought another F4 windscreen in the short size. (Both were on their garage sale page. Great deals.) The stock height windscreen came tinted which I love. The shorty is clear. (Both have vents which I know I'll have to remove before tinting.) I want to tint it. The only thing I can think of is to spray the back side with VHT Nite Shades. Is there a better way to do this? Has anybody tinted a windscreen with the VHT stuff? Best way to do this? Cons?

My other thought since this is a shorty windscreen that I don't think I'd ever actually look through is to try to find some paint in a spray can that matches the bike (Petrol Metallic, I think...blue) and cover the back of the windscreen w/that. Thoughts?

I'm guessing it will be warm enough to spray this (or something else) in the next month or so. I'm trying to be proactive.

 

[K80Shooter]

I'm not sure how the police would feel about you painting it. I think I would ask before finding out the hard way.

 

[Valkrocket]

I'm not sure how the police would feel about you painting it. I think I would ask before finding out the hard way.

Agreed! :agree:

 

[Possible]

Personally I don't think I'd want to make anything anywhere in my line vision to be opaque. You said you "I don't think I'd ever actually look through"
which to my mind means it isn't way down low. Maybe just try some of the tint material first.

 

[ABQSpyder]

PlastiDip if you don't like it just peel it off.

 

[MONK]

I'm not sure how the police would feel about you painting it. I think I would ask before finding out the hard way.

I doubt the police would care but that's a good suggestion, especially if someone was living in one of our more resrictive states. There are plenty of crotch rockets around here with painted "windscreens" (although those aren't much more than a wind deflector).

Personally I don't think I'd want to make anything anywhere in my line vision to be opaque. You said you "I don't think I'd ever actually look through"
which to my mind means it isn't way down low. Maybe just try some of the tint material first.

It's 2" shorter than the stock RT windscreen. Lowered all the way, I doubt it would do much more than deflect wind over (most of) me. I'm tall enough that I can see over the stock height windscreen at full up. I get your point, though. If it started raining and I wanted to raise it up, I wouldn't be able to see through it at all.

PlastiDip if you don't like it just peel it off.

Interesting but it would have to go on the back of the windscreen. I'd have to cut out for the places where it mounts to the bike.

=====================

So, I'm back to spraying tint on it, I guess. Has anyone ever used this stuff? I've watched a few videos and all of them talk about adding a few coats of clearcoat, too. Not sure I want to get that involved in this. I wonder if window tint film would work?

 

[BajaRon]

My Spyder windshield is painted black. But I can see over it. It's been this way since 2009. Never a problem. I think it would depend on the size and location of the windshield. But typical tint film will not adhere well to a polycarbonate shield. They expand, contract, and flex too much.

 

[spyderdave]

Consider "Plexi-film", from windowtint.com; they claim it works for plastic windows. I'm assuming it can be applied "old school": w/ dishsoap/water solution and a soft squee-gee.

I have been told that multiple layers of film can applied to achieve darker shades. (please experiment first, I have only done one layer of tint on autoglass and the "woody" apps on old Ford station wagons!)

I'd not worry about law enforcement, they are concerned with ability to see into a vehicle; not a worry with a trike.

 

[BLUEKNIGHT911]

Consider "Plexi-film", from windowtint.com; they claim it works for plastic windows. I'm assuming it can be applied "old school": w/ dishsoap/water solution and a soft squee-gee.

I have been told that multiple layers of film can applied to achieve darker shades. (please experiment first, I have only done one layer of tint on autoglass and the "woody" apps on old Ford station wagons!)

I'd not worry about law enforcement, they are concerned with ability to see into a vehicle; not a worry with a trike.

:agree: and was going to suggest the same thing ... but He beat me to it .... I have seen this and similar stuff sold in various Auto Parts stores ... I t comes in many shades and colors even chrome and gold ...... back in the day I had one of the orig. style Mazda RX-7's .... and the large back window glass allowed the interior to get pretty hot even with the AC at full blast, so I bought and applied the Chrome type window tint .... no more heat issue ....good luck .... Mike :thumbup:

 

[spyderdave]

Addendum to my earlier post.

Personally, I wouldn't use anything reflective and I would install on the backside of the windscreen, using the polycarbonate as a shield.

 

[MONK]

Consider "Plexi-film", from windowtint.com; they claim it works for plastic windows. I'm assuming it can be applied "old school": w/ dishsoap/water solution and a soft squee-gee.

I have been told that multiple layers of film can applied to achieve darker shades. (please experiment first, I have only done one layer of tint on autoglass and the "woody" apps on old Ford station wagons!)

I'd not worry about law enforcement, they are concerned with ability to see into a vehicle; not a worry with a trike.

:agree: and was going to suggest the same thing ... but He beat me to it .... I have seen this and similar stuff sold in various Auto Parts stores ... I t comes in many shades and colors even chrome and gold ...... back in the day I had one of the orig. style Mazda RX-7's .... and the large back window glass allowed the interior to get pretty hot even with the AC at full blast, so I bought and applied the Chrome type window tint .... no more heat issue ....good luck .... Mike :thumbup:

Addendum to my earlier post.

Personally, I wouldn't use anything reflective and I would install on the backside of the windscreen, using the polycarbonate as a shield.

Thanks, guys. I'll look at the local auto parts stores. At windowtint.com, it appears you have to buy it in bulk starting at about $200. I don't need that much.

I don't want anything reflective. Those cagers can't seem the way it is. I'd hate to blind them, too. (Or more than they already are.) I'd definitely put it behind the windscreen.

 

[blacklightning]

The plastic dip method is what I did for mine. I even did it for a tall windshield. I let it fade out as I worked my way toward the top, and left that clear. I am very happy with the way it came out. The spray on tint will not work well. I have tried it, and it looks like crap. Plastic dip on the back side, and maybe have to reapply it in 3-4 years if needed.

 

[MONK]

The plastic dip method is what I did for mine. I even did it for a tall windshield. I let it fade out as I worked my way toward the top, and left that clear. I am very happy with the way it came out. The spray on tint will not work well. I have tried it, and it looks like crap. Plastic dip on the back side, and maybe have to reapply it in 3-4 years if needed.

How many coats did you use?

 

[BLUEKNIGHT911]

window tint

Thanks, guys. I'll look at the local auto parts stores. At windowtint.com, it appears you have to buy it in bulk starting at about $200. I don't need that much.

I don't want anything reflective. Those cagers can't seem the way it is. I'd hate to blind them, too. (Or more than they already are.) I'd definitely put it behind the windscreen.

... I bought mine at the Auto Parts store maybe 24" x 72" inches .... My application of the Chrome style was only for the FLAT rear window ... :agree: that chrome on the windshield wouldn't be a good idea .... good luck .... PS the window tint is removeable ---- painting it ISN'T .....Mike :thumbup:

 

[Motorcycledave]

i currently have a stock height f4 windscreen on my 2021 rt. Summer here in nc gets a bit warm so i bought another f4 windscreen in the short size. (both were on their garage sale page. Great deals.) the stock height windscreen came tinted which i love. The shorty is clear. (both have vents which i know i'll have to remove before tinting.) i want to tint it. The only thing i can think of is to spray the back side with vht nite shades. Is there a better way to do this? Has anybody tinted a windscreen with the vht stuff? Best way to do this? Cons?

My other thought since this is a shorty windscreen that i don't think i'd ever actually look through is to try to find some paint in a spray can that matches the bike (petrol metallic, i think...blue) and cover the back of the windscreen w/that. Thoughts?

I'm guessing it will be warm enough to spray this (or something else) in the next month or so. I'm trying to be proactive.

madstad.com

 

[MONK]

madstad.com

Care to elaborate, Dave? Does Madstad sell something to tint windscreens? I didn't see anything like that on their site.

 

[PMK]

From a safety standpoint of decreasing the windscreen structural integrity, be very careful about what chemicals you apply to the windscreen. Some windscreens are Acrylic, while others are Polycarbonate. The solvents and aromatics within the paints or spray on products may etch, craze, attack, or even melt the plastic.

As for tint films, I have inquired about those with the pros that install that stuff. From experience they explain it is designed for glass and does not work well or hold up on plastics. Maybe that is incorrect if there is a plastic film specific for plastics. Realize too, it needs to have the ability to easily follow the curved surface.

All the best with it. May have been simply better to purchase the windscreen already tinted and pay more, but maybe not.

 

[MONK]

All the best with it. May have been simply better to purchase the windscreen already tinted and pay more, but maybe not.

Thanks. Ultimately, I can live with a clear windscreen. I'd just prefer not to. It'll be short enough that tinting won't affect the sun. I bought it as I was looking for a shorty windscreen, I think the F4 windscreens are great (as I already have one) and I only paid ~$150.

I'll contact F4 to see if they have any suggestions and/or if they can tell me what products will harm the windscreen.

 

[JohnRuckus]

Long shot in the dark. Maybe the wrap my spyder folks can do something custom.

 

[blacklightning]

How many coats did you use?

Anywhere from 3-4 coats. The thing that I found with the plastic dip is that the more coats you put on it, the better it looks. The thicker you apply it, also helps with covering inperfections. I will see if I can find a picture where I just did the bottom area.