Advice on Voodoo Exhaust - Need Power Commander, etc?

[SmokeyXXX]

Good Morning All!

I am interested in installing the Voodoo slip-on on my 2015 F3-S. I've received several different answers from users of this system:

1) No modification necessary - just slip on and go.
2) Need a power commander, or you'll have to take it to a dealer to have a fuel controller added. The new exhaust confuses the computer and it will start running richer. This causes backfiring and eventually it will run rougher and then start stalling/not starting.

Does anyone have the definitive answer here?

 

[Devious56]

Install the muffler, start your Spyder and let it run for 15 minutes, shut if off and let it cool down. The next time you start it up it will be ready to ride, the computer self adjusts to compensate for the change.

David

 

[SmokeyXXX]

Install the muffler, start your Spyder and let it run for 15 minutes, shut if off and let it cool down. The next time you start it up it will be ready to ride, the computer self adjusts to compensate for the change.

David

Thanks so much, David!

 

[Devious56]

Thanks so much, David!

Good luck to you. When putting things back together, it is much easier to install the top header pipe spring first, and then the two on the bottom.