• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    So there is finally a conclusion to this issue. Ron supplied me with a new set of bushings, and I used a 1/4 drive ratchet instead of a 3/8 like I did on the first install thereby reducing leverage. I was very careful to not overtighten the bolts and paid close attention to the slot gap and the...
  2. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    There is something going on with the email. I have sent a reply. It may be the length of that email thread so I started a new email and sent it today. Hopefully that solves the email problem. Likely my email provider as it does some wonky stuff sometimes (17Jun24).
  3. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    I think there is an email problem of some sort. I have replied. I will start a new email today and abort the ongoing message we had. That may be the problem. My email provider can act a little wonky sometimes.
  4. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    As stated, here is the follow up from my original post. I have been in contact with Ron and he has been very helpful. I have to eat some crow on this situation. Trying to not overtighten the bolt on initial install and get the dimple right, resulted in it being too tight. The subsequent...
  5. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    I am currently in the process of discussing this with Ron via an email conversation and the OD question has been asked. I am assuming they are the same bushings but will know for sure next week. The difference i believe between the ultra and original is not the OD of the bar, but rather in...
  6. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    The purpose of my post was to help others who are experiencing the same "known" problem. Isn't that what this forum is for? I am sure his advice is to tighten them as it is installed correctly. The gap I mentioned wasn't created by anything I did, but the solution I came up with was. I fully...
  7. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    You won't be able to flip the bushings upside down as they are designed to install in one position only.
  8. N

    My solution to the Bajaron Ultra sway-bar 'clunk'!

    Hi everyone. I know there are already different posts on here about the Bajaron swaybars and the clunking they do. I discovered the clunk posts after installing the ultra bar and having the clunk. I have to say I am surprised and dismayed it is occurring. The supposed common remedy was to make...
  9. N

    Hey Ya'll We Got A New Member! Lets welcome NTCAS to SL

    Hello all Well it seems I registered correctly and am sending a first introductory message. Just purchased my first Spyder, a 2021 Sea To Sky. Lots of learning to do about them and have already overcome a few unexpected mechanically challenging issues. I have used this forum as a reference...
Back
Top