• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. G

    How hard is it to do an Alignment - 2022 Ryker 900?

    Doesn't sound like he needs an alignment. Sounds like the handlebars are loose and need to be straightened and tightened up.
  2. G

    Is there going to be a Shad saddle bag for LHS of Rykers?

    We need that setup here in the USA. That would work great with the bags I have on another motorcycle.
  3. G

    BEST Warranty

    I have to recommend Thomas at IMotorsports as well. Today I added 3yr. extended Best Warranty on 2 Rykers for $621 ea.
  4. G

    BEST Warranty

    What dealer did you get the $620 deal from? I have 2 Rykers that I want to add the extended warranty to.
  5. G

    Removing rear wheel on my Ryker?

    You are correct in removing the 2 bolts holding the caliper. Yes the brake disc is attached to the wheel. Here is what I posted some time back on changing the fender. I have replaced the Rally fender on 3 Rykers with the standard fender. It cost around $75 for the full fender and 2 rivets from...
  6. G

    Make your own accessories!

    Would you recommend the Anycubic I3 Mega or suggest looking for something else?
  7. G

    Make your own accessories!

    leenanj, What 3D printer are you using?
  8. G

    Am I leaking oil? Picture included

    When I first got mine and rode it a little I found some oil in the same spot but none on the floor. I wiped it off and have not seen any since. I am thinking it was just a protective coating of oil on the engine that ran off after the engine was hot.
  9. G

    Hand going numb

    I agree. It would be great when you just want to get somewhere and hold a steady speed. Can't wait until someone comes up with it.
  10. G

    Atlas Throttle Lock

    Can't wait until someone actually comes out with a real cruise control for the Ryker. It is throttle by wire so should be easy to do.
  11. G

    I think I can, I think I can

    RykerUsa What mode were you in to get that mileage?
  12. G

    Powering your cell phone

    I think there is a little notch in the plastic under the rubber seal just so you can run the wire like you said and close the door.
  13. G

    Ryker 900cc performance upgrade

    Since he is in Switzerland I wonder if it is tuned differently then USA models and what he is having done just brings it up to what we have here already.
  14. G

    Shel Rotella T6

    Looks like the spec sheet you linked to is an older version. Check out the link that Dragracer gave and the specs. are different.
  15. G

    Shel Rotella T6

    According to the technical data sheet on the T-6 5w-40 it does not state that it meets the SJ,SL,SM, or SJ specification that the Ryker owners manual specifies.
  16. G

    600 vs 900 newbie

    The 600 does have vss and abs brakes. What it does not have is the ECO mode or Sport mode that the 900 has. Also does not have Rally mode that the 900 Rally has.
  17. G

    Sway Bar

    Any pricing yet?
  18. G

    Crooked Handlebars/Loose Steering Stem

    Don't know if everyone knows it but the dealer installs the bars during assembly. If the bars are crooked it is the dealers fault.
  19. G

    Crooked Handlebars/Loose Steering Stem

    It is similar to a bolt with a long smooth shaft at the bottom and threads at the top. It screws in in place of the bolt pulling the handlebars loose. The BRP part# 529036459 steering stem puller.
  20. G

    Crooked Handlebars/Loose Steering Stem

    If it is already loose then you could use this method. If the bars are tight and were just installed crooked it take a special tool to get the bars loose. No amount of hitting is going to get them loose, I tried and then bought the tool.
Back
Top