• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. J

    Auto tune / install and HMF / do it yourself

    Hi from NZ and in process of fitting y pipe with the PCV auto tune - I know it has been a while but do you still have the photos of where you welded the additional O2 sensor adapter in. (They are not available anymore) Many thanks in advance
  2. J

    998cc What Donut gasket & where do I get one???

    Thanks
  3. J

    998cc What Donut gasket & where do I get one???

    Hi all have a 2011 RT The Y joint equivalent (OEM # 707600650) - aftermarket is the Honda OEM # 18392-MAM-000 What I am looking for is the is the exhaust gasket - between muffler and headers OEM # 514053677 - aftermarket equivalent? Thanks in advance
  4. J

    2011 RT fender lights - what amps would strip LED's draw??

    Hi again all - can anyone tell me the draw amps or watts for these either single bank or together. Cheers
  5. J

    2011 RT fender lights - what amps would strip LED's draw??

    Hi: yep but using the negative wire (home made plug n play) through an off relay. Power to the lights comes from the relayed fuse box, though another power relay. Using the negative side as the actuation and the power side running through this relay. The negative wire on the indicator side is...
  6. J

    2011 RT fender lights - what amps would strip LED's draw??

    Yes and no I had extra indicator LEDs on my mirrors and this played up no end with my electronics- hyper flash/screen sensitivity. I removed 1 set and left a small set in place no probs. I have other accessories that I want to use with the block there’re by negating any other possible faults...
  7. J

    2011 RT fender lights - what amps would strip LED's draw??

    Thanks this is what I have but wanting to know what the amp/watt draw is so I can match the correct fuse rating to the lights
  8. J

    2011 RT fender lights - what amps would strip LED's draw??

    Hi all. I am wanting to put the strip LED light to the fender but want to route via a separate accessory fuse block. What I am trying to ascertain is the amperage or watt being drawn so I can place a fuse on the block. I have searched online in all the places I know and nothing comes up - just...
  9. J

    Sena SF4 or Cardo Freecom 4 plus

    Thanks Dave. We have a couple of people in other parts of our country that use these and think they are ok. I was just looking to see if there was any draw backs from getting this set rather than the Cardo Freecom 4+. (Which there are some pit falls to) Dave
  10. J

    New kenda kanine tires

    Hi has anyone got a picture of the rear tyre and tread, as this is what I want to replace and make sure they put the right one on. 2011 RT
  11. J

    question about the majic mirrors

    Yep did the 3 magnet replace on 2011 RT but also rigged up tethers quick release clips so covered all round if fall off. I did replace the analogue gauges though - right side with digital volt meter and left with ram mount ball to hold phone (less clutter on handle bars)
  12. J

    Sena SF4 or Cardo Freecom 4 plus

    Hi all from NZ. Info: wife and I use LS2 modular helmets with sun visor - because of this there is a need for slimline models that don't stick down below the edge of the helmet and stick to the side of the helmet. There is a lot of true fans for each brand .... After a lot research and looking...
  13. J

    2011 RT headlight and fog light led replacement

    Hi all. From NZ. Our lighting system on the bike is different from USA or Canada. headlight is full beam only and the fog light is used as the low beam. The headlight full beam is not the issue but would be nice to change to Led (Led equivilant? 9005 H5?). The low beam is ridiculous went for...
  14. J

    RT mirror backing removal

    Hi all many thanks for the info and short cuts to view items. Lots to ponder. Cheers Dave
  15. J

    RT mirror backing removal

    Hi all.. Has anyone done a video on how to remove the backing of an RT mirror. I want to put some turn signals on the inside edge of the mirror but very tentative about removing the outside backing of the mirrors. Seems everyone has trouble..... Any picks/info/vids would be greatly appreciated. Dave
  16. J

    Head light not on when running

    Thanks all for the info most appreciated. Dave
  17. J

    Head light not on when running

    Thanks Mike will have a look. Dave
  18. J

    Head light not on when running

    Hi all. I have a 2011 RT Ltd and the head light does not come on at all on low beam. The heigh beam an flash works on the left hand side handle bar. How do I get the low beam to work - the manual say it should come on at around 800 rpm : nothing. All info would be great full. Regards Dave
Back
Top