• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. T.P.

    Picked up my new 2025 F3 Limited Special

    A MN Spyder friend of mine recommends this wax for Spyders with big bug issues. T.P.
  2. T.P.

    What Rear Tire Size is needed to correct the speedo?

    Is a couple miles difference in speed between your speedo and your GPS really worth worrying about? Chances are you're not going to ride the posted speed anyway, and if you do, you will probably get run over by everyone passing you! T.P.
  3. T.P.

    Daylight Saving Time - Make sure to adjust your Spyder clocks - Spring Ahead!

    Since today is DST, Spring Ahead make sure to adjust the time on your SPYDER clocks. T.P.
  4. T.P.

    Oil leak at the filter - any suggestions?

    One word or two, BAJARON or BAJA - RON has the parts and can deliver them to your door. T.P.
  5. T.P.

    2015 F3S Oil Pump Failure, replaced, engine still ticking - any ideas on what component/s might have been damaged?

    You're getting into the area of cost to repair being more than the value of your 10 year old Spyder. That's a tuff one for sure, Good Luck. T.P.
  6. T.P.

    Thinking of getting a floor jack - how hard is it to find the right place to lift?

    https://www.harborfreight.com/1500-lb-steel-atvmotorcycle-lift-60536.html CHEAPER and made of steel another dealer https://www.northerntool.com/products/pro-lift-motorcycle-jack-1500-lb-capacity-model-t-2152-112318 another NT...
  7. T.P.

    Washed 2024 RTL, engine light on, no start

    Did you hit the handle bar kill switch ? Many people do and don't know they did T.P.
  8. T.P.

    Need a Madstad "T" Nut

    https://madstad.com/collections/replacement-parts?srsltid=AfmBOore1y-XuECjo5kXtiZi4l_wXLZPxUGIgzQxZyYLShfq50ELa_li Looks like they will sell those parts to you as a set + 10% off T.P.
  9. T.P.

    Anyone know if the OEM Swaybars on F3's are stiffer than RT's?

    I Got my 2017 PB1 F3T from PITBULL powersports of Springfield, MO in February 2017 it had a RT takeoff bar on it from the dealer. Later I would pick up a Ron bar and then when he came out with the Ultra Bar I picked up one of those. A good investment if you ride the whole road at top speed. T.P.
  10. T.P.

    Does anybody use a J & S Jack to lift their Spyder?

    Might want to get info on the Spyder Adapter to Lamont at LAMONSTER GARAGE, He may be the best chance of those being made again. T.P.
  11. T.P.

    Does anybody use a J & S Jack to lift their Spyder?

    https://www.northerntool.com/products/strongway-1500-lb-hydraulic-motorcycle-lift-utility-vehicle-lift-46238?cm_mmc=Google-LIA&utm_source=Google_LIA&utm_medium=Automotive%20%3E%20Automotive%20Lifts%20%3E%20Motorcycle%20Lifts&utm_campaign=Strongway&utm_content=46238&ogmap=SHP%7CLIA%7CGOOG%7CSTND%7...
  12. T.P.

    How about a new rt?

    REALLY ? How many 600 pound + couples are going to fit in those side by side seats? None, Nada, Zero. The above is over max vehicle weight for RT's and F3's (494)&(439)Slingshot (457) and they wont fit in a Vanderhall either. T.P.
  13. T.P.

    Is it possible to do an Oil Change without a lift?

    https://www.napaonline.com/en/p/BK_8216120 Not a bad idea to put one of these drip pans under your drain pan to keep your floor clean and dry. T.P.
  14. T.P.

    White knuckle test ride - can I learn to like this? Buy newish or older/cheaper?

    FlyingBoat, pm sent T.P.
  15. T.P.

    Front Pulley Failure! Incredibly Poor Dealer Response!

    YES this thread does contain misinformation, On the BRP recall notice there never has been a cure time listed for either loctite called out. Fault of BRP or the Can Am Dealerships? T.P. https://static.nhtsa.gov/odi/rcl/2022/RCRIT-22V352-1338.pdf
  16. T.P.

    Front Pulley Failure! Incredibly Poor Dealer Response!

    THE NEW REPLACEMENT SPROCKET IS SILVER I have a copy of the Warranty Bulletin #2019-10 rev 1 September29,2022 Required parts, front sprocket kit, (includes washer)219800553 needed 1 listed as screw 250001017 needed 1 use loctite 609 or 603 torque to 111 lbf-ft +-4 No cure time listed. CHECK...
  17. T.P.

    Two Oil Observations ... I think ...

    :popcorn: T.P.
  18. T.P.

    BRP announced Extended Warranty Price Increase!

    A big Thank You to iMotorsports and Thomas Palmer for taking good care of SpyderLovers members over the years. T.P.
  19. T.P.

    1330cc How fast can I safely run my F3 for how long?

    I'm just going to say that no matter how fast you ride, you're going to get cars, trucks and bikes on your ass going 10/15 over the posted or better. You do have the HP and speed to get out of the way. T.P.
  20. T.P.

    1330cc How fast can I safely run my F3 for how long?

    Your stock 1330 has a redline of 8100 RPM, Add A Dynojet PV3 and your up to 8400 RPM, Doing the Monster route and you can be up to 9200 RPM. I would say that most Spyder owners have never been to 8100 and never will. T.P.
Back
Top