• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. T

    Trouble with Reverse!!!

    My Toy Hauler is not very close to the ground which puts the rear ramp/door at quite a Steep Angle. AND because of the lay out of the TH I Have To Back the Spyder into it. When it's on solid ground and I put it into reverse it backs up fine, BUT backing up the rear ramp/door it pulses terribly...
  2. T

    Looking for some advice on how to load an RT into a Newmar Canyon Star Toy Hauler

    I have a 2012 RT and a 2019 Forest River Gray Wolf 22RR. My unit seems kinda high and the Spyder has bottomed out a couple of times. The ramp to floor transition of the TH is kind of wide and deep. I use a piece of 1" by 6" to fill it in because that's where it seems to bottom out! Right now my...
  3. T

    I have a 2012 RT and recently added a trailer hitch to it & have a problem need help!

    I have a 2012 RT and recently added a trailer hitch to it & have a problem need help! I have a 2012 RT and recently added a trailer hitch on it. It's an "After market" one but it's working pretty darn good. My problem is that to install it, one step is to loosen the rear brake set up. There's a...
  4. T

    Pulsing throttle in reverse?

    I have a new 2019 Cherokee 22RR that I'm using to transport my 2012 RT with and camp with. It has a rear ramp door but the angle is quite steep! A have reduced the angle as much as possible when loading or unloading! The Spyder has to be loaded by backing up the ramp! The toy hauler is wide...
  5. T

    Lifting my 2012 RT? Part Two

    Lifting my 2012 RT with MC Jack? Could somebody give me an idea about where I would do the test lifting to maintain some sembelance of balance? Thanks
  6. T

    Lifting my 2012 RT? Part Two

    I've decided that I'm buying a MC Jack from Harbor Freight. I'll have a way to move it around and it will actually cost less than two sets of the dollies!
  7. T

    Lifting My 2012 RT?

    I would like to lift my 2012 RT onto some rolling supports so I can move it around in my heated garage. The rolling supports are only 2 inches off the concrete floor but would allow me to move it sideways against the back wall (leaving some room from the wall) and still get the wife's car into...
  8. T

    Paint?

    I had the left side(as you sit on the bike) body panel pop off after hitting a small pot hole in the road. I retrieved it and put it back on but it didn't seem like it was solid so I stopped at a hardware store and bought some gorilla tape and put a piece on where it seemed loose. When I got...
  9. T

    Body Panel Part Two!

    Are the rubber grommets specific to where they are located? Specifically asking about the three that hold the LH Left Side Lateral Panel? Thanks! In checking mine they seem to have had some type of lubricant placed or sprayed on them. They to be deteriorating! Thanks
  10. T

    Body Panel?

    Body Panel update It seems like the previous owner lubricated the grommets so the panel would snap in easier! I tried to clean the grommets but don't think I got them clean enough. Can I order and buy just the new grommets? If so from where? Thanks
  11. T

    Body Panel?

    I hit what I thought was a small pot hole and the Left Top Side Panel poped off & went sliding across the roadway into the ditch. Well I retrieved it, dusted it off & put it back on(carefully). It had stayed on for 4 or 5 months without a problem. Well, went for a ride today and low & behold...
  12. T

    Accident July 7, 2018. Prayers needed

    Accident,Prayers needed! Any news on Kathy's recovery and injuries? Wishing her a complete recovery from her accident! AND PRAYERS!
  13. T

    Tires for front of 2012 RT?

    My eyes are not what they used to be,So, can somebody tell me Where on the tire the "Date of Manufacture is?" They look fine are are holding pressure well but if these are the stock tires THEY'RE FIVE YEARS OLD! The side walls from what I can see look good, no weather cracks or anything like...
  14. T

    looking for new Highway pegs

    Highway Pegs? Can you tell me how to access the Spyderchrome site please? Thanks
  15. T

    Tampa spyder riders? Questions

    Tampa spyder riders? I'm a "SnowBird" and have been one for twelve years. I have a unit in an RV Park in Clearwater right off US 19. I had an 03 Honda VTX 1300R for ten years before my Spyder and use Barney's in St. Pete. Used them for the Honda and for the last two years for the Spyder...
  16. T

    Fellow Maine Ryders.

    Lucky You! I'm stuck waiting for my complete right shoulder replacement to heal so I can start rehab. Probably won't be riding until mid to late June. Take Care & enjoying the Ride!
  17. T

    air scoops

    Air Scoops? I ordered mine on line received them and installeed them in two 4 & 1/2 days. Follow instructions EXACTLY and cut body work Carefully and you will be pleased with the outcome!
  18. T

    After Market Radio?

    I saw an add for an after market radio system that had been installed in a Spyder. My question is this: Can you pick up the power outside of the 12 volts that goes thru the computer and use it for accessories especially ones that require 12 volt power?
  19. T

    Motorcycles don't wave back.

    2 wheelers not waving back! Don't take it personally Marty! I'm not sure if it's the number of wheels or the automatic tranny or being made in Canada or what. I rode an 03 Honda VTX 1300 for fourteen years and got used to the no wave. I have a 2012 RT SM5 and am enjoying it as much as my VTX...
  20. T

    Trailer to haul the Spyder

    Your Trailer! I had a trailer that I used to haul my 03 Honda VTX 1300(pre Spyder) back & forth from Maine to Clearwater,FL every Fall & Spring. My trailer was 6' by 10' and a "Low Boy" that made loading much easier. The only thing I added was a piece of 3/8" pressure treated plywood 4 ft tall...
Back
Top