• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. S

    My 22 RT is making strange high-pitched noises at 37-40mph - causes?.

    As a quick test to see if the belt rubbing is the issue, get some belt lube of some sort, silicon grease, or the like, and put some on the inside edge that looks like it's rubbing on the drive pulley. Go for a test run and see if the noise goes away. The lube won't last long but will be enough...
  2. S

    2020 RTL - Check Engine Light ON but no Fault Codes?

    if the bike didnt start straight up for any of 100 reasons, the excess unburnt fuel tripped the 02 sensor due to its range being over what it wants to see. when the bike's ridden up to full temp and does a run for a prescribed number of kms and speed and time, it does a sensor scan and if it...
  3. S

    Heated OEM grips on F3 LTD do just barely - anyone replaced with A/mkt?

    I fitted heated grips the other day to an F3 - now it is in Australia, so it's not that cold.... the grip part looked the same as my RT Ltd grip. So is the problem the controller & not the grips maybe? Has anyone tried changing the wiring so the grips get more current supply? Just a thought...
  4. S

    What's the Fox Podium spring rate on an F3S?

    Hi guys and gals. I'm after the spring rate for the Fox Podium 2.0 rear shock with the remote cannister. I want to upgrade the spring but need to know the rate of the current spring. Is there an off-the-shelf upgrade for the Fox rear shock spring. It's for 2-up riding and carrying a load on the...
  5. S

    2020 RTL brake issue - it's eating rotors! HELP?

    I would guess you have a hub issue that the disc mounts onto, either bent or damaged. Also, a misaligned brake calliper will do the same. Check to see if your old pads are worn on a taper, that's normally a give away the calliper is not aligned. Or maybe you're accidentaly holding the brake on...
  6. S

    Keeping the Bugs Out of Your F3 Radiators

    hi there,so i didnt watch the video i just saw the first screen shot so i may have missed something .but based on that shot i would be concerned with the amount of air flow reduction going into the front area.if your riding ambient temp is cool you may get away with it but i would like to see...
  7. S

    Checking on how to fit F3T Fox Rear Shock?

    OK, found the answer to my question. Sorry to waste your time. I'm used to adjustable shocks having the adjuster rings at the bottom, and someone told me about the BRP part fitting guides site. According to BRP's guides, the Fox 2.0 are fitted with the the spring adjuster at the top and they...
  8. S

    Checking on how to fit F3T Fox Rear Shock?

    Hi all, I am retro fitting a Fox Podium 2.0 remote canister rear shock on a 2017 F3T. I just want to check on the fitting - there is the hose at the bottom of the shocker that goes to the remote canister; there is also a red adjuster knob on the top of the shocker that comes out the same...
  9. S

    RT Ltd seat gas strut - what pressure?

    thank you very much for all the help.i should have added that i have the brp back rest fitted and i have two air hawk gel pads on seat also so a bit more weight to lift up and hold.i run a workshop here in aus so have access to a mobile regas service but the struts new are often the same price...
  10. S

    RT Ltd seat gas strut - what pressure?

    Hi there.can anyone tell what newton metres pressure the seat gas strut is for a 2014 rt ltd . I want to replace or regass mine but theres no pressure on the strut. Thank you for any help.
  11. S

    2014RT - Anyone install a front trunk release by a solenoid?

    thanks everyone for the great and many suggestions.it turns out when i got home and asked about the issues she had been having,she had been turning the key the wrong way and didnt notice the seat had lifted up.its only her second ride by herself and was a rookie mistake.but im leaning towards a...
  12. S

    2014RT - Anyone install a front trunk release by a solenoid?

    hi guys i want to make up a front trunk release using a electric opener.i dont want a remote opener type,i figured i would use a push button and keep it simple.i remember someone did this but cant find it.my wife is struggling to open the front so im trying to avoid a drama on the road.or i...
  13. S

    Ryker security on overnight trip

    In Australia we have the park brake lock with key lock on thd handle to stopthe bike being moved.can you fit that too.
  14. S

    thanks lamonster garage

    i ordered a pair of lamonster garage ryker black floor boards for a customer on the 30th july well they arrived today on the monday the 3rd aug here in australia.wow what great service and a brilliant well made product. thank guys. charles st auto. stuart.
  15. S

    Belt tension

    Top of belt down in the middle of span
  16. S

    2017 RT Ball Joints need replacing - warranty or not?

    If you leave the spyder on the ground and grab the wheel at left hand 10 oclock right hand 3 oclock try pulling the wheel sharply left and right,you will feel a loosness,if you have a buddy get them to do it and you put your hand on the top ball joint A arm area,you will feel movement. I find...
  17. S

    Cannonball Seat Rattles

    there should be rubber blocks under the seat as well that sit around the area of the pillon switch.maybe they fell off
  18. S

    2017 F3 Ltd issues getting it 1st gear

    It seem strange that brp makes a machine that needz to be on flat road to change gears.sounds like a lame exscuse but hey been wrong plenty of times before.
  19. S

    Best belt tensioner = No belt tensioner at all !

    Thanks mike
  20. S

    F3-S belt adjustment

    If you turn it by hand then ride it the belt will not be in the correct spot.you need to set it right then run it off the ground for a while to test.this will then most likely set a vss fault code as your front wheels arnt turning and nanny will think your doing a burn out.
Back
Top