• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Ssd

    Running rough at low speeds?

    I think my hoses are good but should the air flow sensor be moving freely side to side?
  2. Ssd

    Let's see your Spyder!

  3. Ssd

    Brake Failure message

    Nothing is ever that easy Yea i got the brake failure message and checked the brake fluid it looked a little low. I added a little and still had the message so i added a little more and i still had the message. Now its up to the bottom of the cap and still have the message. I checked both...
  4. Ssd

    Running rough at low speeds?

    Same Issue I have the same problem... in between 3k and 4.5k rpms sounds like its skipping. Makes it hard to maintain a 30mph speed or to yeild a turn in 2nd gear. I had juice box installed previously with same results. Luckily my local pd doesn't mind me running about 40mph in a 30mph zone...
  5. Ssd

    Vin question

    I have #2157 and I don't have premier badges.
  6. Ssd

    All alarms are off...!!!

    OK first off check your tail light connectors and bulbs. P2545 and C0040 Simultaneous Faults These faults when occurring are likely to be caused by disconnected or burnt taillight bulbs. U0122 has 2 faults
  7. Ssd

    All alarms are off...!!!

    You need to pull code(s) Crank your spyder set mode to total hours (not trip hrs). Hold down the mode button and flash your high beams 5 times (within 2 seconds) it will show code(s) if there are any. Post them here and should be able to help more.
  8. Ssd

    Help! Only half of ignition coil is firing.

    I will check into that. Im hoping that the repair manual I ordered will give me an idea of the whole ignition opperation so I can check everything. I pulled the ECU out and there is no visable evidence that it is the problem(all pins are intact and clean). It is however glued together so I can't...
  9. Ssd

    Help! Only half of ignition coil is firing.

    The nearest CAN AM dealer to me is about 100 miles and I bought used with no warente so I'm stuck figuring this out on my own. I ordered the service/maintenance/repair manual but I have a feeling it's going to be the ECU. I already spent $90 on a new coil that I didn't need. I just want to check...
  10. Ssd

    Help! Only half of ignition coil is firing.

    OK so the code it is giving me is P0351 No ignition output stage Cylinder #1. This is just telling me what i already know. Does anybody know where i can find a color wiring diagram for 08 GS?
  11. Ssd

    Help! Only half of ignition coil is firing.

    Jumper wire from coil to frame sparks on right side does not spark on left side.
  12. Ssd

    Help! Only half of ignition coil is firing.

    About a weak ago I stopped at a store and when I came back out and started the engine it sounded horrible. Check engine light and scrolling text, when I got it to the house first thing I checked was the coil. The right side of the coil was firing the left side wasnt. So I bought a new ignition...
Back
Top