• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. thereverend

    I cannot get the T25 screw on top RH of the Windscreen bracket to loosen - any suggestions?

    Thanks for all the replies, I used a left-handed thread e-z out, after I drilled a small pilot hole in the bolt head
  2. thereverend

    I cannot get the T25 screw on top RH of the Windscreen bracket to loosen - any suggestions?

    I bought a new windshield from Lamonster Garage, and I went to install it, and I cannot get the T25 screw on the right hand top of the bracket to loosen, any suggestions will be helpful, the left-hand side was no problem. It looks to be a stainless-steel screw.
  3. thereverend

    What experiences have you had with Lithium Batteries?

    I just installed the npl20 in my 2015 RT, I believe this is the way to go.
  4. thereverend

    2015 RT won't start after Tri-axis bar swap - any ideas?

    Mike, I took the battery out, (supposed to be new) charged up my old battery and reinstalled it, looked for fault codes, NONE, hit start button, and it fired up!! Thanks for your input brother.
  5. thereverend

    2015 RT won't start after Tri-axis bar swap - any ideas?

    I have a 2015 RT, I just did a Tri axis handlebar swap, hooking all the electrical plugs back in, and the battery, turn key on, all dash lights light up, when I hit the starter switch all I get is a clicking sound, not hearing the starter engaging. I thought it might be the battery, so I charged...
  6. thereverend

    Tri-Axis handlebar install? How hard is it?

    thank you
  7. thereverend

    Tri-Axis handlebar install? How hard is it?

    Do you remember how much time it took? I plan on doimg the removal of all the skins then the upper fairing then reinstall and do the tri axis bars. Wondering how much time might be involved.
  8. thereverend

    Where can I get instructions for BUDS2 software?

    YouTube has a few videos on it.
  9. thereverend

    Tri-Axis handlebar install? How hard is it?

    Anything I need to know about the heated grips on the triAxis install?
  10. thereverend

    Tri-Axis handlebar install? How hard is it?

    I have a 2015 RT Special Edition and am considering a set of tri-axis bars. My question is, how hard is the install? I searched you tube and not a lot of information, do you have to take the front end off? Any input will be appreciated.
  11. thereverend

    1330cc Is an ECU Modification permanent? Will BUDS overwrite it next service?

    I had the reflash with stage 2 from wick-it and also own a buds system, no problems found in the bud's system.
  12. thereverend

    Who Out There Has Gotten The Replacement Sprocket?

    I had mine done a couple weeks ago in Hattiesburg MS, called and made an appointment when sprocket was available, drove the 4 hours to get there, two hours later back on the road to West Monroe LA. Completely satisfied with this Dealership, better than "bring it in and leave it, we'll get to it...
  13. thereverend

    Recently renewed my BUDS/BUDS2 License.

    I have used it for eliminating DESS, and resetting default codes for friends. I plan on doing a speed bleeder brake fluid bleed and BUDS is required for the master module, it's a learning curve, but I only use it occasionally.
  14. thereverend

    Recently renewed my BUDS/BUDS2 License.

    I renewed my MegaTech license for a year for $373.00/buds/buds2
  15. thereverend

    Laser Alignments for charity?

    You will be Blessed!
  16. thereverend

    Has anyone installed the aluminum belt guard? Any Vids or pics of the install?

    I recently purchase the aluminum belt guard from http://www.spyderrt.info and the installation instructions are not as visual as I would like, so if anyone has a video or some pictures it would be greatly appreciated. My ride is a 2015 RT. Thanks.
  17. thereverend

    What did you do to your Spyder today?

    I did a clean install of a Midland MXT275 GMRS Radio on my 2015 RT. I also have one in my Toyota Tacoma that we use as a chase truck on runs.
  18. thereverend

    Any Trailers specific for hauling a Spyder?

    Look up the ALUMA MC10 Trailer, really good for hauling your Spyder.
  19. thereverend

    Leaving key in ignition

    I do, and i like it.
  20. thereverend

    WTF? Can't find anyone to mount my new Quadtrac tires!

    I would drop to the 165/60/R15
Back
Top