• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. jtpollock

    Iron Butt

    :roflblack::roflblack::roflblack::roflblack: we started in Springfield Missouri and ended in Castle Rock Colorado. I you do the math 1157/17= 68.06 so that not too bad only stops were necessary and gas/food. as you can see my photo below I ride an RS and pull a tagalong trailer. ;)
  2. jtpollock

    Front fender support

    Mike, Thanks I have a local shop am going to see if they can weld as I do not have the skill or tools. Keep the rubber side down :D jtpollock
  3. jtpollock

    Front fender support

    WOW... looks like a ware and tare item I have just under 70,000 miles and the highways through the Denver area are poor to say the least. Thank for the input I will see if I can get to welded taking it apart could be a problem with the fender lights just another Spyder adventure. :banghead...
  4. jtpollock

    Front fender support

    That's what I am afraid of it was such a clean break like snapping a pencil. Thanks for the input :thumbup: jtpollock
  5. jtpollock

    Iron Butt

    No Job is Complete Congratulations on your achievement, that is awesome. :thumbup: but no job is complete till the paper work is done... we 1157 miles in 17 hours with driving rain wind and pulling a trailer and we still had a good day. keep on riding :yes::yes: jtpollock
  6. jtpollock

    Front fender support

    HELP!!! :yikes: Has anyone had the front fender support break? Not sure if I was hit and run in the parking lot or if this is a defective part. It a very clean break right at the weld I have a small scratch on the outside of the fender :dontknow: any ides before I go off and contact the...
  7. jtpollock

    customized vent screens

    Very cool that's a much nicer look than the chicken wire. Can I steal your idea? :clap::thumbup::yes: jtpollock
  8. jtpollock

    Independent Tire Dealer for Spyders

    Well if you have not found anyone lookup The BKG at 1141 Atchison Ct Caste Rock Co 80109, ask for Troy he has mounted all the tires on my Spyder over the last 4 plus years. He can also balance them with ride-on. Good stuff :thumbup::thumbup: jtpollock
  9. jtpollock

    LED Headlights

    All is good and thank you to all for you input and I did not give up my mechanic tweaked the tabs on both light and got them in correctly in about half an hour not bad saved my thumbs and fingers. Now I can see :clap::yes::bowdown: jtpollock
  10. jtpollock

    Tough Decision

    That's not nice :roflblack::roflblack::roflblack: enjoy the ride be safe...jtpollock
  11. jtpollock

    lifeless spyder

    Not a Mechanic but did you check all the fuses if you do not get the dash light to come on could be electrical :dontknow: best guess good luck..jtpollock
  12. jtpollock

    AUDIO for F3s

    Shark Audio not too costly sounds good easy to install :thumbup: jtpollock
  13. jtpollock

    998cc VS 1330cc engines

    BRZ one hot cookie too bad they went away from the all wheel drive...nojokejtpollock
  14. jtpollock

    Ground Lights

    those look like the ones I have on my RS I really like them...jtpollock :clap:
  15. jtpollock

    LED Headlights

    SUCESS Well almost I spent close to 4hr on Saturday modifying the clips to mount the headlights. I tried several things to cut and modify the clips ( thanks to Drew) for the clips I destroyed both of them. Then I did figure out how to modify mine I finally used a ball grinder to make the...
  16. jtpollock

    LED Headlights

    THANKS AGAIN, got the clips yesterday afternoon now comes the hard part making the clip fit I noticed that there is no index tab at the point that should be the top anyway the fun begins Lamont sent a link to his post installing HID headlights so I have photos and I will try to take photos so...
  17. jtpollock

    Mutaza Saddlbags

    :agree: I would like to see the mounting system. My current Bags prevent me from removing the rear panels a real pain when I do any work in that area :chat: :nopic: jtpollock
  18. jtpollock

    Installed 2009 RS Gas Door

    Mike does it come in Black :dontknow: might be interested :thumbup:jtpollock always like to see DIY that works out well...:clap::clap:
  19. jtpollock

    Pullback handlebars

    Bummer I really like mine and they were not that hard to install.:dontknow: jtpollock
  20. jtpollock

    Pullback handlebars

    Look at Custom Dynamics I have a 2012 RS-SE5 and I put these on my spyder within the first week I had it they are adjustable to a point they rise up and back there is enough cable to install them my bars are black and the riser are black good luck.:thumbup: jtpollock just found this Custom...
Back
Top