• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. tobor9

    Turn Signal ?

    Well I was right,sort of,it was at the switch but not the switch itself,turned out to be one of the 3 wires was not soldered correctly and had come off. PJ at Velocity re-soldered it and all is good.:clap:
  2. tobor9

    New RT Limited turn signal fast flash

    Is there any way to do this on a RS,the 2011 RS uses a slide switch, so you can't hold it down for 30sec. Just wondering if could fix my problem with no turn signals .
  3. tobor9

    Turn Signal ?

    Not the fuse,same one does 4way and clock,both working. I know sometimes LED cause problems but I had them for a couple of years,no problem(they worked yesterday) and the 4ways all work. I'll call Velocity Monday.:banghead:
  4. tobor9

    Turn Signal ?

    This morning my turn signals don't work,but my 4way flashers do,so no bad lights(all LED). Is there a separate fuse for signals? or do you think it's the switch? I know it does not have a flasher but is controlled by the gauge closter and I assume it does the 4ways also. So fuse or switch?
  5. tobor9

    Warranty (Education Needed) and purge valve

    I had one replaced on my BEST Warranty for $50 copay as it just after my 2yr warranty expired,get the BEST ext warranty(you can buy it until your original 2 yr factory warranty expires)
  6. tobor9

    Need to secure license tag.

    I had two plates vibrate off(cheap tin) and bought a plate frame to hold it,four bolts,if you used those temper proof bolts you should be secure.
  7. tobor9

    Longest your spyder has been in the shop?

    About a week waiting for a part(ECM) otherwise 4-5 hrs max.
  8. tobor9

    Just got the "Your computer has a virus" phone call last night.

    I get them every so often and I do have Mac's ,so I just tell them to F**k off and hang up,they don't call much anymore but I do get Emails I know are BS and only show up on my phone,not email on my other computers(all share same mail accounts) don't understand that but ignore them.
  9. tobor9

    Newbie forum member from South Central Texas - "Howdy!"

    Welcome,I also have a 2011 RS,though not stock anymore as you can see by my Signature below this text there is many things you can do to make your RS fit you better and handle better.:yes:
  10. tobor9

    You guys heard of Boom Trikes?

    A local guy has one,it's great looking but low to the ground,I like being higher up so I can see and be seen.
  11. tobor9

    Installing 12v adapter in frunk

    Yes there is but you may not be able to get to it without removing frunk as it is in the center.(tyed to post behind center of frunk) on the RS/RSS the frunk comes off easy(4screws on top,2 on bottom and 2 plugs) I had my frunk off for something else so I used it for my Angle eye rings,you may...
  12. tobor9

    How to wire LED strip.

    If thats all you are going to do yes you could connect to the position lights or any other switched circuits ,I put in 10 light strips(A arms,L&R service panels,floorboards and rear tire) and connected them to a dedicated fused circuit I ran from the battery with a switch on the dash. I bought...
  13. tobor9

    question on BEST warranty

    They gave my wife(SDM) a 2+2(2yrs factory + 2yrs BEST) with her 2013RTL.
  14. tobor9

    Installing 12v adapter in frunk

    Sorry SPYD3R,but do not use the posts under seat,if you loosen the "-" post its very hard to get it tight again.if you want to have always hot got to the Battery or as I did take off the frunk(on the RS/RSS it is easy to remove) and there is a always hot wire connection tyed to a center post...
  15. tobor9

    Tricrings

    I have them on my RS,yes they mount to the ring around the lights,you drill a small hole to run wire and attach with the sticky tape on ring then run wire to power,for me I used the unswitched Aux circuit and put a switch on my dash. Not that hard and looks great.
  16. tobor9

    REAR FENDER BRACKETS BRAKING>>SAFETY ISSUE

    I'm sorry OJ UK, but if the fender on your car fell off after a couple of years would you think this is OK?I don't think parts of my RS should fall off and maybe cause me to wreak,if that rear fender had broken at hwy. speed the power wire for the plate light could have caused it to be pulled in...
  17. tobor9

    Tips on buying?

    I don't know where Fairplay,SC is or how far from Charleston,SC, but the people at Velocity PowerSports will treat you right,we've bought three :spyder2:'s from them(2 from Paul) and both their salespeople and PJ their service tech. are great. The dealership is in Ladson,SC just west of Charleston.
  18. tobor9

    2012 RS-S Windshield ??

    You can buy the bracket and get the adjustabilty withouth the windshield,I use it on my 23"ultra-touring
  19. tobor9

    Garage Door Opener

    We just use a car type remote Velcroed to a convent place on the dash,never had a problem with it getting wet or anything.
  20. tobor9

    Who here has *actually used* their BEST Warranty (either regular, *or* extended)?

    I've used mine twice since the original warranty expired on my 2011RS,first was two weeks after the OW expired, my ECM failed and left me with one working cylinder,I was able to limp home as it was only about 5mls. but had it flat beaded to dealer,no problem getting it fixed($50 deductible and...
Back
Top