• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. fencepost

    F3t rear fender

    I removed that on my 2016 F3T the first week I had it. I do put it back on when I tow my trailer. I did replace the screw out pins to pushpins, make it easy to take on and off.
  2. fencepost

    F3-T with an antenna with an MBL Innovations Luggage Rack

    I responded to your email this a.m. asking you to call me to discuss. If you remove the left saddlebag to expose the antenna mount and remove it from the bike you will be able to free the antenna from the mount. Again, please call should you need additional assistance. Maurice
  3. fencepost

    Long term results without brake system flush

    Honda and Harley have and are having recalls because owners did not change fluids as recommended.
  4. fencepost

    Anyone tried a Vision Pull behind trailer? Any comments?

    This is a knockoff of a Bushtec trailer. They purchase an item then send it to China have it made and call it there own.
  5. fencepost

    Black Dymond Gripper Floorboards in stock!

    Very nice.
  6. fencepost

    Trailer Hitch

    I had a 2015 F3S with a Bushtec hitch. The price is a little more than the one from Canada, but Bushtecs hitch is two piece with the receiver being removable thus no sign of having a hitch.
  7. fencepost

    Trailer harness adapter

    Lewis @ Electrical Connection will be able to fix you up. You will need to get the bike end plug from Bushtec
  8. fencepost

    Rivco parts for F3 Limited

    Rich is a great guy to work with you won’t be disappointed.
  9. fencepost

    location of jumper wire to connect rear wheel speed sensor to front wheel sensor

    A number of years ago I put my wife’s 2010 RT on a chassie Dyno after doing some mods with ram air. All I did was remove the speed sensor at the rear wheel. The issue was not the wheel, but the rear tire. It was difficult to strap down and maintain traction on the Dyno drum.
  10. fencepost

    F3 Front Sprocket Inspection

    BRP needs to change the way the front pully fits on the trans main shaft. Current design the inside of the pully has a countersink that slips on the main shaft and belt alignment issues will cause uneven pressure on the front pully causing the splines and countersink to wear on the main shaft. A...
  11. fencepost

    Looking for Ryders near Dandridge - East Tennessee - New to the Area!

    Wife and I both ride F3’s and are in Hancock County just north of Morristown. Contact my wife @ [email protected]
  12. fencepost

    Paying Tribute to 2200 Departed Veterans

    Please join CVMA 18-3 and help distribute the pennies.
  13. fencepost

    F3s vs F3 Touring noise level?

    I put an RT muffler on my wife’s F3S after I put the mid pipe bypass on.
  14. fencepost

    Car tire install

    If you remove the rotor any tire shop will mount it. I would suggest that you get the wheel balancer from Lamont. If it's the front again any tire should be able to do the job.
  15. fencepost

    LAMONSTER APPROVED WHEEL BALANCERS- FRONT SET OF TWO

    The only thing you will need to do is put spacers on the fender struts where they attach to the hub. Extra thick washers work well.
  16. fencepost

    New Tire

    Just put a Kuhmo on my wife's F3S. Ordered it from WallMart got it in 2 days. Also put the rear wheel balancer from Lamont.
  17. fencepost

    Heel/Toe shifter on an F3T? SM6

    A H/T shifter is not for everyone, you eather like it or hate it. I road a 66 Harley foe 15 years and have put or made H/T shifters for all the bikes I've had over the last 55 yrs. I never have to polish the toe of my boot. Thank you for the nice comments.
  18. fencepost

    Heel/Toe shifter on an F3T? SM6

    Parts needed; "Harley Shift Shaft" about $20.00 from Drag, 2 Harley shift arms. I used the OEM shift bracket just cut it down and drilled and welded Shift Shaft. It will be best to cut the shaft after it has been welded this will ensure you have it square with the bracket. For my application I...
  19. fencepost

    Heel/Toe shifter on an F3T? SM6

    heel/toe shifter I made one for my F3T, very easy to do. PM me.
  20. fencepost

    plastic cover

    Second Lamonsters caps, have them on both our Spyders, frame, axles front & rear and handle bars.
Back
Top