• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. C

    Cvt Belt Replacement

    I wonder how much those special tools cost....most likely cheaper than the labor costs. Luckily I'm not close to needing them yet.
  2. C

    Dealer fun, advice needed

    It's all clear too me now. SORRY..."I BAD" https://www.spyderlovers.com/forums/showthread.php?132902-Cvt-Belt-Replacement&p=1523999#post1523999
  3. C

    Cvt Belt Replacement

    Special tool required
  4. C

    Dealer fun, advice needed

    How did this thread turn into CVT belt replacement.....just wondering.
  5. C

    Frunk temperature

    How about painting the Frunk lid a nice shiny gloss white. (would that help?) and add this> https://www.slingmods.com/canam-ryker-glove-box-heat-control-kit-dei?search=glovebox Also someone needs to design a lid with vents for air flow that seals tight when rain :gaah:is moving in...
  6. C

    Engine oil capacity differences between 2019 & 2020?

    The original thread was about 600/900, 2019/2020 Ryker Manual oil capacities. Now it's 2014 2015 RT,F3, 1330 Ace. This is too much over thinking. I'll just stick to what my manual states that came with my 2019 Ryker Rally, 3.7 VERY MAX qts does not overfill my Ryker. I would just go by what your...
  7. C

    Engine oil capacity differences between 2019 & 2020?

    This is going to blow your mind....My manual states Ryker 600 2.75qts. & Ryker 900 3.7 qts. I will stick to 3.7qts. This is from the manual that came with MY Ryker. At last CORRECT oil level check (unless that has changed also) ...Read label by fill funnel. My fill level was about 5/8 distance...
  8. C

    hmm - oil on the drain plug! Anyone else seen this?

    I went out and looked again. This time you have the honors of correcting me. Yes, I do have it. Thank goodness. I saw a "boss" that is milled down and tapped that was near that general area and stopped looking any further. It is tucked back in there isn't it. The tapped hole maybe (I'll assume)...
  9. C

    hmm - oil on the drain plug! Anyone else seen this?

    I just got back inside. I went out and put a my 17mm hex socket on both drain plugs, so YES they are the same. By the way I'll be 68 yrs. young? July 31. I was in QC mechanical inspection (Hydraulic Pumps, Ball Screw/nut manufacturing) all my working career. And I tell you what, when I first...
  10. C

    hmm - oil on the drain plug! Anyone else seen this?

    As far as "Drain plug" goes are you looking at #22 on bottom side of housing or #20 (2) located on lower front side and right side of housing. Behind these are springs and INDEX pins. I would not trust myself touching these. Funny thing is, on the right side of housing (facing rear of Ryker) I...
  11. C

    hmm - oil on the drain plug! Anyone else seen this?

    I was not aware of the "8mm head trans drain plug" in your #2 picture. That one is different. But comparing part numbers on the Cheapcycleparts web the others are the same GEARBOX #15 & 21 seals, The drain plugs are #16 & #22...
  12. C

    hmm - oil on the drain plug! Anyone else seen this?

    For both engine oil and gearbox.
  13. C

    hmm - oil on the drain plug! Anyone else seen this?

    So, did you ever figure out why there was oil on the drain plug?
  14. C

    Ryker Rally body panels

    I rode 118 miles last Sunday with it. It was quite windy. It did vibrate more than the Can Am shield. But I didn't really get distracted by it or anything. It would not be a deal breaker to me. Heck, the handlebar/mirrors vibrate.
  15. C

    Ryker 900 ACE Instrument Panel

    I thought mine was tilted also. But it was the handlebars/stem/cluster that were not straight while wheels going straight. The far right end of handlebar was about 3/8" forward. That made the cluster look like it was low on the right side. It's an easy fix if you are mechanically inclined with...
  16. C

    Ryker Rally body panels

    Here's the results of staying out the bars, and only on the streets with Ryker. Old color yellow, repainted to color shown. No paint color name on spray can. I also installed the Show Chrome Windshield. It seems to be around 1" taller than Can Am shield. much wider though. As a lot of people...
  17. C

    hmm - oil on the drain plug! Anyone else seen this?

    Was the oil recently changed? Either way I would clean off then check to see if drain plug is torqued up to spec. I hope it's not the old (reused) crush washer causing the drip. large plug is 22ft/lb, smaller plug is 11 ft/lb.
  18. C

    No oil in gearbox

    I can't remember where I read this but the oil in the gearbox WHEN COLD should be 3mm below the oil level check hole. When very warm the oil should be up even to the bottom edge of the oil level check hole. To check this I thought of using a "J" bend bicycle spoke. (normal spoke) I would place...
  19. C

    Is it normal for Ryker handle bars to move up & down?

    Up and down motion can be fixed... Remove Black plug #130, best with screwdriver and small needle nose pliers to get it completely out of stem channel. Back out #702 bolt with a 13mm socket This is suppose to be a FLANGED bolt, look closely at picture, (washer/bolt one piece) mine's not (2019...
  20. C

    Ryker handle bars loose/knocking

    Up and down motion can be fixed... Remove Black plug #130, best with screwdriver and small needle nose pliers to get it completely out of stem channel. Back out #702 bolt with a 13mm socket This is suppose to be a FLANGED bolt, look closely at picture, (washer/bolt one piece) mine's not (2019...
Back
Top