• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. C

    Clobbered my fender :(

    This will help https://www.youtube.com/watch?v=ZV2K3so8HXY
  2. C

    Clobbered my fender :(

    Did you ONLY turn the red knob to #4? Or did you also (MUST) compress the spring, per manual, for 2 up riding.
  3. C

    Steering column play - where is the adj washer fitted? Ryker

    https://www.spyderlovers.com/forums/showthread.php?132391-Ryker-handle-bars-loose-knocking&p=1537681#post1537681
  4. C

    Break In Period Maintenance

    I did my own "service check" at 3100 miles. Then I put the Ryker in to hibernation at 3400 miles. An amount of very fine metal grit was on magnetic drain plug. I also checked other fluid levels, and air filters. At 6000 miles I had the service dept. check steering linkage, hook up to bus for any...
  5. C

    Range Calculation in Fuel Statistics

    You can trust your range calculator a lot more AFTER the fuel capacity starts dropping on the fuel gauge. (bar graph) The fuel tank is so oddly shaped is most likely the reason why it's not accurate with a full tank. Others have mentioned this reason also.
  6. C

    handlebars question - anyone changed out bars to bring closer to rider?

    I added the 2" risers by Rox Speed to my Ryker Rally. I did tilt the risers back about 45 degrees also. Rox offers different sizes also. Don't go too long, the electrical harness is only so long. I unclipped the wiring from my handlebar. PRO: No drilling out new handlebars and converting...
  7. C

    Who has or has not had problems with their Ryker??

    I bought my Ryker Rally on July, 20 2019. Build date is 10/18. I just turned over 9,000 miles on my last ride. Low miles due to storing it over the Winters and other hobbies. I've been very happy with my Rally. The only very minor problem I've had was that the handlebar was slightly crooked to...
  8. C

    Tips on Taking Delivery

    Make sure the shock preloads are adjusted to solo or 2 up riding. Whichever for you. Jerk up and down at the handlebar stem. Should be solid. A washer was missing on earlier year makes. I would imagine that has been solved by now though.
  9. C

    2019 Ryker 900 oil leak

    There is a good chance that the oil that is up on your skid plate is your old oil from draining. It's real common to have the old oil splatter up in there while draining. Being aware of this I role up an old rag or even a plastic shopping bag and tuck up between the skid plate and the bottom of...
  10. C

    LED lighting (undercarriage)

    This MIGHT help you. Hook up to the black wires according to this video. WATCH FULL VIDEO. How to Install a Brake Module on Your Can-Am Ryker https://www.youtube.com/watch?v=QAYkQxqIX-Y
  11. C

    Second ride and air filter cover flew off!

    & I thought I had bad luck yesterday. While riding in 28mph winds and 44 max gust, I lost 1 of 4 nuts holding the windshield on. The others were loose. All were replaced with lock nuts. (w/nylon? inserts) I use Cheapcycleparts.com. but go to your dealer first he may be one of those that just...
  12. C

    Ryker Battery Strap - how do I get it back on?!?

    You don't have to take the front fascia off completely. Don't even loosen the two torx screws below. Just unhook the clips on the upper back side of the fascia and that will loosen up that part of the fascia that is tight against the battery strap. I learned this from and thanks to my mechanic...
  13. C

    Will the upper rear fender work with the Slingmods trunk on the rally

    I'm one of those Rally owners who converted to a full fender. I do like the looks of the open fender, but I hated always cleaning (or leaving it dirty) the road crud off of the top of the swing arm and from up under the seat/max mount area. I do have that extended upper rear fender on. I never...
  14. C

    How difficult are Ryker Skid Plates to install? Worth it?

    I'm wondering if any of you have bought and installed the Ryker Skid Plates. They may be a good idea at the time ya' wish you had them. Difficult to install? https://www.brppac.com/brp-219401028.html...
  15. C

    Battery removal unnecessarily difficult

    I mentioned to my mechanic, a while back, how tough it is to unhook the front of the battery strap. He said to unhook the tabs at the upper rearward side of the front cowling. You don't have to loosen the 30 Torx at the bottom front. It works. I also trimmed down some electrical tape and wrapped...
  16. C

    Ryker comfort seat installation.

    I bought a comfort seat on sale off Amazon about a week after I tucked my Rally in for hibernation. I'll be installing it soon I hope. I'm wondering if there are some rough edges around the square(?) "holes" where the tabs snap in. I haven't looked too closely at mine yet. If the seat support...
  17. C

    Does the Ryker Rally need a better sway bar?

    I bought and use the Baja Ron Links only. I'm happy with that set up also as RykerRick is also. (post #2) The Baja links are obviously more beefed up the the thin composite ones. It seems a lot of ryders like using and see big improvements while using the Baja sway bar also while winding up and...
  18. C

    Where is everybody?

    I'm at home relaxing in my Igloo....ha! I agree the roads are always less traveled on game day. But ya gotta watch for those pregame/half time beer and snack runners.
  19. C

    CVT Explained.

    I came across this on Youtube. It explains the workings of a CVT. Good detail. https://www.youtube.com/watch?v=Sp228-39WhQ
  20. C

    Limp mode and fault code problem.

    This MIGHT help (your mechanic). No 1SS code. And these are the closes to 155 code that I found. CHECK YOUR FUSES. Good Luck!
Back
Top