• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. P

    Canam RT 2010 SE-5 Fuel Economy

    Hi Mate sorry", I only just saw this post and I just read the stats on your question. 31 MPG = 10.974 KPL. my low fuel light comes on at 140 Miles which is 220 KMS Regards Peter
  2. P

    Rattle in my 2010 RT Spyder exhaust

    Rattle in my muffler Hi Mate", this is what I ended up getting done. I got a Walker stainless steel muffler fitted and it sounds better than before, but not to loud. I got cat delete done too. Sorry about the late reply, Regards Peter
  3. P

    Rear brake piston won't compress to fit new brake pads Model spyder is 2010 techno

    Hi mate", I think the problem with C Clamp was I did not have it clamping down straight on the piston, Regards Peter
  4. P

    Rear brake piston won't compress to fit new brake pads Model spyder is 2010 techno

    rear brake piston won't compress for rt spyder Hi all", I purchased a disc brake spreader tool and the job is done. Thanks to all who post here and Finless Bob too. Picture of tool used here, Regards Peter:congrats:
  5. P

    Rear brake piston won't compress to fit new brake pads Model spyder is 2010 techno

    Hi Peter", I live in Bairnsdale Victoria and am in the Ulysses club and there are a few Spyder owners in the club. maybe they might know what to do, Regards Peter
  6. P

    Rear brake piston won't compress to fit new brake pads Model spyder is 2010 techno

    Hi all", I spent the whole day today trying to fit new rear brake pads on my 2010 rt spyder SE5 model, I got everything done ok until I took old brake pads off, but then the piston would not compress even with a c clamp. I just loosened slightly the bleeder but not too much because I heard BUDS...
  7. P

    Rattle in my 2010 RT Spyder exhaust

    Hi mate yeah I think it's time to replace the muffler, regards Peter
  8. P

    Rattle in my 2010 RT Spyder exhaust

    hi mate", yeah I think it's time to replace the muffler, regards Peter
  9. P

    Rattle in my 2010 RT Spyder exhaust

    Hi mate yeah its time to replace the muffler regards Peter
  10. P

    Rattle in my 2010 RT Spyder exhaust

    Hi mate", yeah it sounds like pennies rattling so it's time to replace the muffler, regards Peter
  11. P

    Rattle in my 2010 RT Spyder exhaust

    Thanks mate I think i get it replaced, regards Peter
  12. P

    Rattle in my 2010 RT Spyder exhaust

    Hi All", I have a rattle noise inside my standard muffler 2010 RT Spyder and I look at it in aboput 30 minutes, however any ideas or similar experiences would be much appreciated, regards Peter
  13. P

    Oil Dripping onto drive belt RT Canam Techno 2010 model

    Hi Mate", bike went to mechanic and they found the oil leak. They said that the oil breather tube was the culprit so they tightened the clamp over it and no leaks since then and travelled 500 Kms. I insert a picture of underneath and no oil marks
  14. P

    Oil Dripping onto drive belt RT Canam Techno 2010 model

    Yeah and I can't see any oil or stains near it, regards Peter
  15. P

    Oil Dripping onto drive belt RT Canam Techno 2010 model

    Possible Oil leak Hi Doug", I took the Spyder in for a new rear tyre yesterday and the only place they could see an oil stain was on the cylilder breather tube, and I read a post here earlier about that, so I will just look and see of the oil stains on the belt and just keep an eye on it...
  16. P

    Oil Dripping onto drive belt RT Canam Techno 2010 model

    Thanks mate I have a look at it
  17. P

    2011 RT stalling issue

    Could be that your battery is at end of life because that happened to me on my RT SE5 Techno a couple of years ago and I replced the battery. Since then I have not had a problem with it stalling, that is if you are referring to the motor stopping Regards Peter
  18. P

    Oil Dripping onto drive belt RT Canam Techno 2010 model

    Hi all", I have noticed some little oil marks on my drive belt on my Spyder lately. I pulled the left hand side plastics off the Spyder and could not see anything, so I pull plastics off again and have another look at it in a few days. Dealer said i may have overfilled the Spyder with oil, but...
  19. P

    Possible oil leak

    Possible Oil Leak Hi Guys thanks", and I cleaned the dity oil layer off side of enginge and I look at it again this week . as we know Spyders usually collect fluid of any sort at this plastic point under the bike, Regards Peter
  20. P

    Possible oil leak

    Hi all", my RT 2010 Techno Spyder is ruinning good but I noticed there is a couple of oil marks on the outside of the drive belt. I looked underneath the left hand side and the plastic that covers the filters on the SE5 and a drain plug underneath with a hax head bolt on it has oil on it. I...
Back
Top