• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. G

    Ryker Rally Oil plugs access?

    looks like when you took off the skid plate you cut all the zip ties holding the wiring loom to the skid plate. Did you zip tie them back when replacing the skid plate?
  2. G

    Help Removing Skid Plate

    does anyone know if you can pull down the skid plate with out having to cut the zip ties?
  3. G

    Help Removing Skid Plate

    I will check again but believe everything is tightened to torque specs. It is due for its 1 year first service and I was going to do the oil change myself. The oil has never been changed from new so I am hopeful the dealership did not over fill it. It is a very slow leak. It is strange the...
  4. G

    Help Removing Skid Plate

    I noticed a small amount of oil under my ryker right where the drain plugs are but I want to pull off the skid plate and have a better look. I have removed the 5 plastic rivets that hold on the skid plate as per the service manual but it seems that the skid plate is zip tied to something...
  5. G

    Anyone tried the Magna Skid plate?

    Has anyone tried the Magna skid plate? https://customspyderworks.com/products/magna-skid Similar in concept to the skid plate made by spyderpops, which I had on my F3T. Given how how our Ryker front ends are looks like a good idea?
  6. G

    HowTo: Ryker Floorboards

    do the lamonster floorboards raise you foot height or would they be at the same level as the existing pegs? Adding the other boards mentioned here would seem to raise your foot 1/2 " + which is not great for us with long legs?
  7. G

    Tires that will fit the RYKER

    I have done some hunting around and posted this as an option for the front tires but nobody had any comments. It is very similar in diameter but .8 " wider. FEDERAL FORMOZA AZ01 in this size. Thoughts? 145/60-16 165/50-16 Difference Diameter inches (mm) 22.85 22.5 -0.35 -1.6% Width inches...
  8. G

    Fender Touching A Arm on Full Lock to Lock Turn

    Thank you for the response. I have checked them and they are definitely fully tightened. I am planning to take it in for its first service and will see what the dealership has to say.
  9. G

    Handlebar rotation

    I pulled the throttle and turn signal clusters off and thought I could just completely flip the bars but have them at basically the same level, that would raise them some, but noted the holes for the clusters are at two different distances from the end of the bars so I will need to do a bit of...
  10. G

    Fender Touching A Arm on Full Lock to Lock Turn

    I do think the handlebars may be out of alignment slightly and will adjust those and see if that they fixes the issue.
  11. G

    Fender Touching A Arm on Full Lock to Lock Turn

    I just picked up a slightly used 2019 Ryker 900 and was maneuvering it around in the garage. When i turn the handle bars in one direction all the way the front fender touches the A arm. however in the other direction it does not. It is close but does not touch. Is something wonky that...
  12. G

    finally Hub Caps from BRP for the front axle

    I did a search for BRP part numbers and the number 705402677 does not show up anywhere. i am assuming these are from a prior spyder model? Did you order from a Can Am Dealer?
  13. G

    finally Hub Caps from BRP for the front axle

    I did a search for BRP part numbers and the number 705402677 does not show up anywhere. i am assuming these are from a prior spyder model? Did you order from a Can Am Dealer?
  14. G

    Additional "storage"

    https://www.amazon.com/Emoly-Upgraded-Portable-Compatible-Universal/dp/B0824S54K2/ref=sr_1_1_sspa?dchild=1&keywords=Foot+pump&qid=1592774440&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExV1ROSk1IRDlWV1JKJmVuY3J5cHRlZElkPUEwMzI0MjI1MTgyNjJCNVdMTDlSSiZlbmNyeXB0ZWRBZElkPUEwMzAyNDEzMk9MOTY3UFZL...
  15. G

    Ryker Rally New Tires where to find them???????

    I have had an RS, a ST Ltd and a F3T. I am about to pick up an Ryker Ace 900 and know I will likely want to change the front Kendas before they wear out if they are anything like the Kendas on my other Spyders. I have been playing around with online tire size comparison calculators and wonder...
  16. G

    Ryker Rally rear shock

    thanks. I checked out the video. I then looked at their website. For some reason they don't seem to make a stage 2 rear shock. There is only a $40 difference in price between the stage 2 and stage 3 front shocks. So it seems I would have to go wth a stage 3 rear and might as well go with...
  17. G

    Ryker Rally rear shock

    Rally Rear Shock Bigger Guy I am trying to decide between the standard Ryker or the Rally and one of the things having me leaning to the Rally was the "better" shocks and then I saw your comment. I am 6'4" and would be a similar weight to you with riding gear on. It seems like maybe the...
  18. G

    Elka vs Fox Can Am Shocks

    thanks. I was leaning to the elka’s only because I am in Canada and more affordable than the m2’s. I will do some research on the leaking issue. I can buy the elka’s cheaper than the us $ price ignoring shipping on the m2’s so after factoring in the terrible exchange to us$ I am way ahead with...
  19. G

    Solo Comfort Seat Install

    is it just that it is not more comfortable than the stock seat? i am mostly interested in it as it sets you back and up which would be handy for taller riders.
  20. G

    Elka vs Fox Can Am Shocks

    will be picking up a Ryker Ace in the next week and having owned other spyders in the past will want to upgrade the shocks. I could go with the Can Am offered Fox or get a stage 3 Elka shocks and save about 25%. For those of you who have installed the Elka's have you been happy with the change...
Back
Top