• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. SNOOPY

    DIY laser alignment - correcting dealer foul up

    Things have changed around here, I remember a few years back when people showed how to do this yourself the threads would shut down and disappear. Like my thread back around 2014. Lol Nice to see we are allowed to share things now.
  2. SNOOPY

    shifting issue

    That’s a good idea if the bolt came loose, I’ll have to check. So maybe I’ll JB weld it, longer bolt and set pin. :roflblack: .
  3. SNOOPY

    shifting issue

    I’ve fabricated/mocked up worse before. It is hard to get to, but would love to be able to drill in a set screw. Will have to look how bad it is...and if my locktightened bolt backed up. Thanks again for the input.
  4. SNOOPY

    shifting issue

    Well crap, I ran out there for kicks to see if I could see better under it and the aluminum arm is spinning on the hard shaft again. :banghead: So I bought a new aluminum arm last time, lock tighten it and the new bolt on. And now 6 months later has happened again? :banghead: What is a more...
  5. SNOOPY

    shifting issue

    Okay, good points. I can see the bar that goes to the shaft has not come off like before... but I don’t know that it hasn’t shaved off more of the shaft and is spinning on the shaft. Let me confirm that first, thank you. I “thought” I repaired it good enough as to not have “that” issue...
  6. SNOOPY

    shifting issue

    I think I hear it trying to do something, but it just stays in neutral. It was staying in 1st till I tried to put it in Reverse....now it’s just stuck in Neutral. :( .
  7. SNOOPY

    ST VS. ST-S exhaust

    Yes, have it on my 2013 ST-S also.
  8. SNOOPY

    shifting issue

    I had the issue of the shift lever coming off last summer and not being about to shift. Now I have the issue of not being able to shift, but it’s not the shaft connection. I was low in oil and after filling still doesn’t shift, did I burn up a solenoid? And which one? :( .
  9. SNOOPY

    420256562 #32 hydraulic shifting solenoid valve specs?

    Interesting thread. But seems never got to a conclusion.
  10. SNOOPY

    Is this a Shift or Idle issue?

    So finally got a chance to ride it yesterday and it seems better. Only things I did was clean and regap the plugs and replaced the two short hoses at the carb w some fresh silicone ones. I’ll have to check on a warmer day or longer ride in case it’s still doing it when hotter. .
  11. SNOOPY

    Is this a Shift or Idle issue?

    Are you saying the purge valve may be the issue? I usually fill up at home w a fuel jug, so usually don’t over fill. But I can check that or replace if it’s a common issue. Where is it? Lol .
  12. SNOOPY

    Is this a Shift or Idle issue?

    Just checked plugs and hoses. Plug color looks good. Plug gaps were about .033, i regapped to .030 (within spec of .028-.031). Torqued to 124 in lbs. Hoses looked like getting some age on them and not real tight so I replaced since I had more. Now a pretty tight connection. Didn’t find...
  13. SNOOPY

    Is this a Shift or Idle issue?

    I could check that also when I check the vacuum lines. I changed the plugs wires and hoses a few years back w the upgraded stuff from Bajaron. But yeah, feels a little like that, but only from idle after sitting a moment. .
  14. SNOOPY

    Is this a Shift or Idle issue?

    I don’t think my motor has ever been run at a low RPM. :roflblack: .
  15. SNOOPY

    Is this a Shift or Idle issue?

    To answer some of the questions above.. I have changed the vacuum lines to Bajarons silicone hoses, that was years ago and can recheck. Oil and filter changes have been done probably a little sooner than CanAms recommended time intervals and I check the level all the time. And I notice this...
  16. SNOOPY

    Is this a Shift or Idle issue?

    2013 STS SE5 So what it seems to be doing is when on a ride, bike warmed up, if I stop for a moment such as at a light, when I go to take off...the bike shutters/hesitates (whatever you want to call it) looking for a gear to move forward. It is a split second but annoying. Bike should already...
  17. SNOOPY

    ST Longest Ride Ever

    This waiting 60 seconds between posts is a crock, what are we teenagers? Lol .
  18. SNOOPY

    ST Longest Ride Ever

    Yep, you get it. :roflblack:
  19. SNOOPY

    ST Longest Ride Ever

    I have a $1000 Corbin seat, it’s not the problem, I’m old and get tired. Lol .
  20. SNOOPY

    ST Longest Ride Ever

    Yeah sounds a lot like me. I did my own alignment when I bought the bike and still have original front tires that still look awesome. .
Back
Top