• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. B

    Brake Failure RT - Can I reset the fault codes?

    Brake Failure reset Make sure the key has been turned off for more than 30 seconds. Turn on the ignition key. Wait for the screen to finish booting up. You may not need to push the Mode switch but it won't hurt. Press the brake pedal hard enough to activate the low pressure switch. HARD. If you...
  2. B

    Blue Ridge Parkway 2021

    I thought that way for many years so I didn’t ride it, there is so many views and tight corners that I really didn’t want to go faster. Do your self a favor and ride it.
  3. B

    What could be causing this Brake Failure Alarm?

    Try resetting the Brake Failure Make sure the key has been turned off for more than 30 seconds. Turn on the ignition key. Wait for the screen to finish booting up. You may not need to push the Mode switch but it won't hurt. Press the brake pedal hard enough to activate the low pressure switch...
  4. B

    FINALLY A helmet we can use and enjoy

    Thanks, I have a headset in my snowmobile helmit but always on the out look for a built in solution Dave
  5. B

    FINALLY A helmet we can use and enjoy

    Dave although this is a motorcycle message board,do you know if this helmit will have a dual lens face shield available for snowmobiling?
  6. B

    Is this clutch set up stock?

    Is that peg actually connected to the shift linkage, it looks too far away from the foot peg to be useful. It looks like someone added a foot rest to the bike to me.
  7. B

    Kickstand Bolt fell out!!!

    If this happens to you, simply take one of the triple clamp bolts (that still leaves you with three) and use it.
  8. B

    No compression

    Someone mentioned the screen in the oil return line, make sure that you pull it apart and clean it before you ride it to much.
  9. B

    Natchez Trace

    Never on a motorcycle but on it in a car, would be great ride on a bike, very little traffic as big trucks weren't allowed. If I remember there are no commercial stops/business and Hardly any stop signs even as the trace pretty much has the right of way along its route but plenty of nice pull...
  10. B

    Help! Only half of ignition coil is firing.

    Before you spend the money try plugging the ECM back in and see, even though the pin looked clean the voltages are so low sometimes just reseating the plugs works.
  11. B

    Head Gasket?

    Was the oil milky colored? Did the exhaust have a sweet smell? If not you could restart it and let it warm up and see if the smoke clears up. If it does recheck the oil and see if it is still clear or if its milky. Did you have a wvery cold winter? Maybe there was not enough antifreeze for the...
  12. B

    998cc Issues with fuel and Temperature gauge 2011 Spyder RT

    You didn't by chance install Magic Mirrors did you, some (me included) have had problems with the analog gauges after installation, i never liked them anyway so I just took them out, others had luck with reversing the polarity of the magnets.
  13. B

    Bike powered Midland CB really works!

    If I understood this correctly you are powering the CB off a USB port, I thought a USB port only supplied 5 volts, did you modify the USB port to provide 12 volts or do you have a CD that is powered by 5volts?
  14. B

    I have in stock today SAVAGE HELMETS

    Dave, what do you get for one of those helmets, go ahead and pm me if you want
  15. B

    Magic Mirrors causing gauges to misread

    Gauges I got magic mirrors early before anyone mentioned possible problems with the gauges, installed them in the spring before taking my bike out of storage so when my temp gauge did not work I just assumed that it went bad over the winter, not wanting to spend the money to replace it I just...
  16. B

    Dealership said don’t use 8mm spark plug wires

    The last time I purchased spark plugs from Ron he included the paste in the box. Nice suprise.
  17. B

    PROBABLY A DUMB QUESTION BUT...

    go ahead and jump it if your in a hurry, some say shut your truck off, after you get it running as soon as you shut it off put it on the charger.
  18. B

    stalling issue getting worse along with idle

    At least you got the hard part done, consider installing the Magic Mount For the mirrors, than you will not have that frustration every time you remove the mirrors.
  19. B

    stalling issue getting worse along with idle

    While you still have it apart make sure that you looked at the correct vaccum hoses, the problem ones are on the left side of the bike, they are about 1 1/2" long and are run from the MAPs sensor to the thottle bodies, I found it easier to unbolt the sensor to replace the hoses. Also your in so...
  20. B

    stalling issue getting worse along with idle

    Jim, let me tell you my tail, earlier this summer I had the same symptoms, I had already changed plugs and wires several hundred miles before, I changed the vacuum hoses, did see some crack after I bent them, still stalled, plugged purge valve, still stalled, check checked thottle boots and...
Back
Top